Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair TRQ

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair


  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes lug nut studs already installed, ABS Sensors, and ABS Sensor Wire Harnesses
  • 3 Bolt Flanges
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA53914 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel and tire (1:18)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:07)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. step : Remove brake disk (4:13)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (4:42)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:10)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:50)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will these work with the trailblazer ss AWD its a 2006?
Daniel F February 6, 2016
Hello, Yes this kit will work fine on your model application.
Brian F February 8, 2016
P A July 9, 2018
Yes, this is an exact replacement for your application.
Lewis M August 8, 2018
The parts I received for my trailblazer was good.
Sebastian- K May 3, 2019
Yes, It worked just fine on mine!
M R December 19, 2019
Will this fit the v8 chevy trailblazer model?
Doug G May 19, 2016
Yes, this will fit the 2002-2009 Chevy Trailblazer, it is not specific to engine size.
Derek C May 19, 2016
Will these fit my 04 Chevy trailblazer? It is the v6 4.2l and is 4x4 but is not all time 4x4!
Mika H December 15, 2016
This will fit your model application as shown. You have CV axles on the front so you need the splined hubs on the front for your 4WD/AWD system to operate. Engine size is not relevant here
Brian F December 15, 2016
Where our these made?
Cheryl C October 31, 2017
I bought and installed these with the help of the videos. They work better than the OEM. Who cares where they are made. Seriously, easy to instal, work better than advertised. Incredible price. No reason to care if they come from high dollar union labor or sweat shop in India.
Charles S October 31, 2017
Not sure probably China,just like your high dollar parts,at your local parts house.bottom line unbeatable value and quality and faster shipping than your local parts house
P A July 9, 2018
lot of times you can get moved or others usa-made parts for half the price at your Auto Parts sell them for still a good quality Park
J E May 10, 2019
I recently purchased an axle assembly. I would like to know if there’s a specific wheel hub and bearings I need to go with it? 2007 Chevy Trailblazer LS
Prince H February 14, 2018
02 to 09 envoy trailblazer n several other model and make vehicles use the same hub
P A July 9, 2018
sounds like theyre asking for a hub assembly for a four-wheel drive they would be different
J E May 10, 2019
For the front wheels, yes.
Scott H July 31, 2019
2wd and 4wd are different.
M R December 19, 2019
Will this fix a 2wd?
Johnathan C October 4, 2019
Thank you for your inquiry. These will fit a 2WD vehicle, please be sure to check the vehicle fit list to make sure your vehicles information is in the list. Please let us know if you have any further questions.
Anthony C October 4, 2019
I believe so
C A October 4, 2019
I would research your cars VIN number on the GM parts website and double-check part numbers if he doesnt have one or doesnt match the one thats on their web thing I would call them just to double-check or check with your dealer but I believe are all those help should work they work fine for me
Joseph K October 5, 2019

Fits the following Makes:

Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2003-2006Chevrolet SSR Chevrolet SSR Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2002-2009Chevrolet Trailblazer Chevrolet Trailblazer Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2002-2006Chevrolet Trailblazer EXT Chevrolet Trailblazer EXT Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2002-2009GMC Envoy GMC Envoy Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2002-2006GMC Envoy XL GMC Envoy XL Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2004-2005GMC Envoy XUV GMC Envoy XUV Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2003-2007Isuzu Ascender Isuzu Ascender Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2002-2004Oldsmobile Bravada Olds Bravada Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair
2005-2009Saab 9-7X Saab 9-7X Front Driver & Passenger Side Wheel Bearing & Hub Assembly Pair

Part Interchange

Brand Label Part Number
ACDelco FW121
ACDelco FW121MX
Beck / Arnley 051-6171
Beck/Arnley 051-6171
Chicago Rawhide BR930470
Chicago Rawhide BR930397
Delphi 7467245
Delphi 12413038
Drive Tech America NT513188
GMB 725-0086
General Motors 12413257
General Motors 12413037
General Motors 15130858
General Motors OEM 12413257
General Motors OEM 12413037
General Motors OEM 15130858
Isuzu 8-15130858-0
Isuzu 8-12413037-0
MOOG Hub Assemblies 513188
Raybestos 713188
Raybestos Brakes 713188
SKF BR930397
SKF BR930470
SKF BAR-5129-A
Saab 12413257
Saab 15130858
Saab 12413037
Timken 513188

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHS00025
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA53318