Replaces

Chevy Equinox Pontiac Torrent Suspension Kit - 1ASFK05668

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:45)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Wheel Well Liner (1:17)
    • Remove all of the fasteners out of the wheel well liner
    • Pry the fasteners out with a flat blade screwdriver
    • Remove the 10mm nut in the top of the wheel well
    • Remove the wheel well liner
  3. step : Removing the Shock Absorbers (2:14)
    • Remove the 18mm bolt at the top of the shock
    • Remove the 18mm bolt and nut at the bottom of the shock
  4. step : Installing the Shock Absorbers (3:51)
    • Insert the shock into place
    • Tighten the 18mm bolt at the bottom of the shock
    • Tighten the 18mm bolt at the top of the shock
    • Torque the top and bottom bolts to 81 foot-pounds
  5. step : Installing the Wheel Well Liner (5:04)
    • Insert the wheel well liner into place
    • Tighten the 10mm nut to the top of the wheel well
    • Press the fasteners into the liner
  6. step : Reattaching the Wheel (5:50)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Gloves
  • Dust Mask

  • Ratchets & Related

  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2006 Chevy Equinox 6 Piece Set Suspension Kit
  • 2006 Pontiac Torrent V6 3.4L 6 Piece Set Suspension Kit for Models with RPO Code FE1 (Soft Ride Suspension)

This part replaces:

  • Moog K80461
  • KYB 345055
  • KYB SR4160
  • OE # 15218268
  • Monroe 172210
  • OE # 19122332
  • Monroe 182209
  • OE # 19122334
  • Monroe 911258
  • OE # 19122335
  • OE # 19122333
  • OE # 15218267
  • KYB SR4159
  • Monroe 172209
  • Moog K80460
  • Monroe 182210
Part #: 1ASFK05668


How-to Video:

(06:19 min)