This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade Ceramic Enhanced Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Come as a PAIR
  • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 92260109
  • Fits 5 lug wheels
  • Vented
  • 13.58" (345mm) diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of dealer brakes.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brakes (1:29)
    • Put a 17mm wrench on one lug stud to counter-hold the rotor
    • Remove the T30 Torx bolt from the brake rotor
    • Remove the two 14mm slide bolts from the brake caliper
    • Pull off the brake caliper
    • Hang the caliper aside with a bungee cord
    • Remove the two 18mm bolts from the caliper bracket
    • Pull off the caliper bracket
    • Strike the rotor with a hammer if necessary
    • Pull off the rotor
    • Tap the pads out of the caliper bracket with a hammer
  3. step : Preparing the Brakes (3:33)
    • Pry the brake shims off the caliper bracket with a flat blade screwdriver
    • Clean the caliper bracket with a wire brush
    • Clean the shims with a wire brush
    • Apply brake grease to the caliper bracket
    • Press the shims onto the caliper bracket
    • Apply brake grease to the shims
    • Slide the guide pins out of the caliper bracket
    • Clean any old grease or debris off the guide pins
    • Apply grease to the guide pins
    • Slide the guide pins into the caliper bracket
    • Clean the hub surface with a wire brush
    • Apply grease to the hub surface
  4. step : Installing the Brakes (5:49)
    • Slide the rotor onto the hub backwards
    • Spray brake parts cleaner onto the back of the rotor
    • Install the rotor onto the hub normally
    • Spray brake parts cleaner onto the front of the rotor
    • Install the T30 Torx screw into the rotor
    • Put the caliper bracket into place
    • Install the two 18mm bolts into the bracket
    • Tighten the two 18mm bolts to 44 foot-pounds of torque
    • Tighten the 18mm bolts a further 90 degrees
    • Install the brake pads into the caliper brackets
    • Apply brake grease to the back of the brake pads
    • Release the brake caliper
    • Compress the caliper piston with pliers
    • Slide the caliper onto the bracket
    • Install the two 14mm guide pin screws into caliper
    • Hold the guide pins with pliers
    • Tighten the guide pin bolts to 20 foot-pounds
  5. step : Installing the Wheel (8:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 144 foot-pounds in a crossing pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Paper Towels
  • Brake Parts Cleaner
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 17mm Socket
  • 14mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2011 Chevy Caprice Front Ceramic Brake Kit
  • 2012 Chevy Caprice V8 6.0L Front Ceramic Brake Kit
  • 2013-2016 Chevy Caprice Front Ceramic Brake Kit
Only 2 left in stock
Part #: 1ABFS01122

How-to Video:

(09:05 min)