Replaces

Chevy Camaro Control Arm with Ball Joint - 1ASFK03364

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side) Front Lower Forward & Rearward
  • Includes ball joint & bushings
  • Direct replacements
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:50)
    • Loosen the five 22mm lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:22)
    • Loosen the 21mm nut that holds the ball joint to the wheel spindle
    • Leave the nut flush with the end of the ball joint stud
    • Strike the wheel spindle with a hammer to loosen the ball joint stud
    • Remove the ball joint nut
    • Hold the 21mm nut at the frame end of the control arm with a wrench
    • Remove the 21mm nut and bolt at the frame end of the control arm
  3. step : Installing the Control Arm (4:03)
    • Line up the control arm
    • Insert the bolt through the frame end of the control arm
    • Insert the ball joint stud into the wheel spindle
    • Start the 21mm nut onto the ball joint stud
    • Hold ball joint stud with a 10mm wrench
    • Tighten the ball joint nut with a 21mm nut
    • Tighten the ball joint nut to 30 foot-pounds of torque
    • Tighten the ball joint nut an additional 90 degrees
    • Start the 21mm nut at the frame end of the control arm
    • Raise the suspension with a jack
    • Hold the 21mm nut with a wrench
    • Tighten the 21mm bolt to 37 foot-pounds
    • Tighten the 21mm bolt an additional 120 degrees
    • Remove the jack from the suspension
  4. step : Installing the Wheel (7:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lowr the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 21mm wrench
  • 10mm Wrench

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Control arm kit
Great product, OEM quality, fit perfect and no struggles to remove and install. Products were exactly the same no differences in size, shape, and quality. Shipping was extremely fast and was very pleased with speed of shipment and delivery. Great customer service and great products. Definitely would recommend shopping here and will return.
May 17, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2010-2013Chevy Camaro Chevy Camaro Front Lower Forward & Rearward Control Arm with Ball Joint 4 Piece Set
2014-2015Chevy Camaro Chevy Camaro LS Front Lower Forward & Rearward Control Arm with Ball Joint 4 Piece Set
2014-2015Chevy Camaro Chevy Camaro LT Front Lower Forward & Rearward Control Arm with Ball Joint 4 Piece Set
2014-2015Chevy Camaro Chevy Camaro SS Front Lower Forward & Rearward Control Arm with Ball Joint 4 Piece Set
2014-2016Chevy Camaro Chevy Camaro ZL1 Front Lower Forward & Rearward Control Arm with Ball Joint 4 Piece Set
Part #: 1ASFK03364


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:58 min)