Chevy Buick Pontiac Saturn Rear Wheel Bearing & Hub Assembly Pair TRQ

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • 4 Bolt Rectangular Flanges
  • Fits 5 Lug Wheels
  • Replaces dealer part numbers: 12403095, 88964177
  • Studs already installed
  • Built to strict quality control standards
  • Fit models with ABS - RPO Code "JL9"
  • Have ABS sensors built in with correct plug configuration
  • Fit FWD (Front Wheel Drive) Models only

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull the brake pads off
  3. step : Removing the Brake Rotor (2:04)
    • Remove the two 13mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Hold the rotor in place with a flat blade screwdriver
    • Remove the T30 Torx screw from the rotor
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Removing the Wheel Hub (3:16)
    • Remove the four 10mm bolts from the wheel hub
    • Disconnect the ABS wiring harness from the hub
    • Strike the hub with a hammer to remove it
    • Push out the emergency brake cable pin with a hammer and a screwdriver
    • Pull the spring off the brake backing plate with a screwdriver
    • Pull the emergency brake cable out of the brake backing plate
  5. step : Separating the Wheel Hub from the Brake Backing Plate (5:01)
    • Remove the two T30 screws from the backing plate
    • Pull the bracket off of the backing plate
    • Pull the backing plate off of the hub
    • Pull the emergency brake ring off of the hub
  6. step : Preparing the New Wheel Hub (5:35)
    • Clean the hub mounting area with a wire brush
    • Apply white grease or bearing grease to the mounting area
    • Put the emergency brake ring onto the backing plate
    • Put the hub through the ring and backing plate, making sure the ABS wiring connector is lined up with the backing plate hole
    • Pull the arm off the emergency brake activator
    • Put the emergency brake activator onto the ring
    • Attach the bracket to the backing plate
    • Insert the two T30 screws into the bracket
    • Push the emergency brake arm into place through the bracket
  7. step : Installing the New Wheel Hub (7:39)
    • Attach the emergency brake cable to the emergency brake arm
    • Push the emergency brake cable into its bracket
    • Insert the pin into the bracket, using a hammer
    • Attach the spring to the emergency brake arm
    • Pull the spring onto the bracket with vise-grip pliers
    • Push the hub into place
    • Start one of the 10mm bolts to hold the hub in place
    • Start the remaining three 10mm bolts
    • Tighten the four 10mm bolts to 45 - 50 foot-pounds of torque
    • Reconnect the ABS wiring harness
    • Adjust the emergency brake, by turning the wheel with a flat blade screwdriver
  8. step : Reinstalling the Brake Rotor (9:43)
    • Slide the rotor on
    • Adjust the emergency brake further, if necessary
    • Insert the T30 screw into the rotor
    • Put the bracket back into place
    • Start the two 13mm bolts by hand
    • Tighten the bolts to 75 foot-pounds of torque
  9. step : Reinstalling the Brake Pads (10:45)
    • Apply grease to the brake pads
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 30 foot-pounds
  10. step : Reattaching the Wheel (11:27)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Star Drivers & Sockets

  • T30 Driver

4.83/ 5.0
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Parts shopping made simple
Needed rear hubs for my daughters car. Auto parts store wanted $250 for the pair. I just couldnt pay that. I have purchased quality parts from 1A auto be for. Difficult parts like exhaust manifolds. A pair of hubs were $71. A no brainer in my opinion. These parts were exact fit which made in easy to install. Fast ship to. Sorry but auto parts stores are ripping everyone off for there convenience.
August 28, 2017
The Best 1AAuto
They are the best I dont have problem with them thanks to 1AAuto thats were everyone should buy there parts they the best and they not expensive they are real low price thanks 1AAuto
December 4, 2017
Great Product
Great product for a wonderful price! Had a friend put them on my car and did not take long at all. I have not had any problems with them yet and I do not miss the noise my old ones made.
April 16, 2018
Great quality for the price
Pre load felt right. No faulty ABS sensors. Zero runout. Great fit.
September 8, 2018
Extremely satisfied!
Fast shipping. Awesome price! Better warranty that brick and mortar store and lower price. Will definitely be buying parts from 1A Auto from now on!
September 16, 2018
Grand Prix parts
Was worried at first. Came on time as directed. Parts replaced Factory Parts with no issues would recommend anybody buying them if they own a Grand Prix. Thanks 1A Auto
September 21, 2018
Wheel hub/bearing assembly
Part fit perfect. Ive put this brand on my daughters car too. Ive gotten 75000 miles out of the Timkin brand, but was much more expensive. Im hoping this brand will last too. Right now im satisfied with the part.
November 24, 2018
Wheel bearings
1fit good, look as good as other Brand
May 13, 2019
I buy hubs
This was a really good price for a pair of hubs assembly for my impala and they fit just right ??
July 16, 2019
Second time buyer
Fast shipping and great costumer service.
July 16, 2019
1A auto is the best place to buy my auto parts because the price is right and the quality is absolutely great! I have never had to return a part and my orders have always been exact!
November 19, 2019
Wheel hub assy
Very pleased with delivery time and communication, will order same product again,great fit
February 17, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2008Buick Allure Buick Allure with ABS Brakes Rear Wheel Bearing & Hub Assembly Pair
2009Buick Allure Buick Allure Rear Wheel Bearing & Hub Assembly Pair
2005-2008Buick LaCrosse Buick LaCrosse with ABS Brakes Rear Wheel Bearing & Hub Assembly Pair
2009Buick LaCrosse Buick LaCrosse Rear Wheel Bearing & Hub Assembly Pair
2005Buick Terraza Buick Terraza Front Wheel Drive with 4 Bolt Flange Rear Wheel Bearing & Hub Assembly Pair
2006-2008Chevy Impala Chevy Impala with ABS Brakes Rear Wheel Bearing & Hub Assembly Pair
2009-2013Chevy Impala Chevy Impala Rear Wheel Bearing & Hub Assembly Pair
2014-2016Chevy Impala Limited Chevy Impala Limited Rear Wheel Bearing & Hub Assembly Pair
2006-2007Chevy Monte Carlo Chevy Monte Carlo with ABS Brakes Rear Wheel Bearing & Hub Assembly Pair
2005Chevy Uplander Chevy Uplander Front Wheel Drive with 4 Bolt Flange Rear Wheel Bearing & Hub Assembly Pair
2004-2008Pontiac Grand Prix Pontiac Grand Prix with ABS Brakes Rear Wheel Bearing & Hub Assembly Pair
2005Pontiac Montana SV6 Pontiac Montana SV6 Front Wheel Drive with 4 Bolt Flange Rear Wheel Bearing & Hub Assembly Pair
2005Saturn Relay Saturn Relay Front Wheel Drive with 4 Bolt Flange Rear Wheel Bearing & Hub Assembly Pair
Part 1ASHS00209
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA53462