Replaces

Chevy Buick Pontiac Saturn Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set

Specifications:

  • Comes as a SET of 4
    • (2) - FRONT Hubs with 3 Bolt Triangular Flanges - LH (Driver Side) & RH (Passenger Side)
    • (2) - REAR Hubs with 4 Bolt Rectangular Flanges - LH (Driver Side) & RH (Passenger Side)
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 12403095, 7467357, 7467587, 12413093, 12413094, 12413125, 12413126, 12413194, 88964168, 88964177
  • Studs already installed
  • Built to strict quality control standards
  • Fit models with ABS - RPO Code "JL9"
  • Have ABS sensors built in with correct plug configuration
  • Fit FWD (Front Wheel Drive) Models only
    • Do NOT fit AWD (All Wheel Drive) Models

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:23)
    • Remove the two 14mm bolts from the brake caliper
    • Pull the caliper aside
    • Pull the brake pads off
  3. step : Removing the Brake Rotor (2:04)
    • Remove the two 13mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Hold the rotor in place with a flat blade screwdriver
    • Remove the T30 Torx screw from the rotor
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Removing the Wheel Hub (3:16)
    • Remove the four 10mm bolts from the wheel hub
    • Disconnect the ABS wiring harness from the hub
    • Strike the hub with a hammer to remove it
    • Push out the emergency brake cable pin with a hammer and a screwdriver
    • Pull the spring off the brake backing plate with a screwdriver
    • Pull the emergency brake cable out of the brake backing plate
  5. step : Separating the Wheel Hub from the Brake Backing Plate (5:01)
    • Remove the two T30 screws from the backing plate
    • Pull the bracket off of the backing plate
    • Pull the backing plate off of the hub
    • Pull the emergency brake ring off of the hub
  6. step : Preparing the New Wheel Hub (5:35)
    • Clean the hub mounting area with a wire brush
    • Apply white grease or bearing grease to the mounting area
    • Put the emergency brake ring onto the backing plate
    • Put the hub through the ring and backing plate, making sure the ABS wiring connector is lined up with the backing plate hole
    • Pull the arm off the emergency brake activator
    • Put the emergency brake activator onto the ring
    • Attach the bracket to the backing plate
    • Insert the two T30 screws into the bracket
    • Push the emergency brake arm into place through the bracket
  7. step : Installing the New Wheel Hub (7:39)
    • Attach the emergency brake cable to the emergency brake arm
    • Push the emergency brake cable into its bracket
    • Insert the pin into the bracket, using a hammer
    • Attach the spring to the emergency brake arm
    • Pull the spring onto the bracket with vise-grip pliers
    • Push the hub into place
    • Start one of the 10mm bolts to hold the hub in place
    • Start the remaining three 10mm bolts
    • Tighten the four 10mm bolts to 45 - 50 foot-pounds of torque
    • Reconnect the ABS wiring harness
    • Adjust the emergency brake, by turning the wheel with a flat blade screwdriver
  8. step : Reinstalling the Brake Rotor (9:43)
    • Slide the rotor on
    • Adjust the emergency brake further, if necessary
    • Insert the T30 screw into the rotor
    • Put the bracket back into place
    • Start the two 13mm bolts by hand
    • Tighten the bolts to 75 foot-pounds of torque
  9. step : Reinstalling the Brake Pads (10:45)
    • Apply grease to the brake pads
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 14mm bolts by hand
    • Tighten bolts to 30 foot-pounds
  10. step : Reattaching the Wheel (11:27)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Star Drivers & Sockets

  • T30 Driver

4.33/ 5.0
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
0
0
0
2
Awful
Order four wheel bearings and the rears were ok. But the front pair were awful. I spent most of a day doing thwm and replacing calipers and stuff. And when i went to test drive the wiring connectors ripped right off the wheel bearing. I made sure that i installed them correctly. No twist. Not tangled or wrapped around anything and used the dust cover tie point for the plastic connector. Just disappointed because i worked so hard and invested money and then i did it for nothing.
July 26, 2017
1ashs00617 hub ass trqbha53658
Price was great hub was perfect fit for my car. Watched the video on how to install them never did this job before. Toke my time at 4 hours a wheel from the ground. Quality product. Saved a lot of money doing this job myself.
November 14, 2017
Perfect fit, solved problem!!
These were a perfect fit and solved my noise issue! Local shop told me Id have to replace the entire strut assembly for about $500 a piece, looked the hubs up here and found them to be much cheaper and easy to replace myself!
February 23, 2018
Very fast delivery
If I need any other parts I will deal with this company they are very fast on sending your product to you and the right part that means a lot in todays parts ordering Ive ordered off of others in the past and always received the wrong part look forward to doing more business with these people
March 26, 2018
Love the videos and parts!
Every time I work on a car and get stuck, I search through the step by step videos and 1aauto always helps me out! I have ordered parts a couple times from this company and they have earned my trust. I was concerned about buying parts online from the US as I live in Canada but there is nothing to worry about. Keep up the good work! Ill be ordering parts again when needed. Thanks so much.
September 4, 2018
Next Day Delivery!!!
Parts were as ordered and I received them the very next day! We were excited to get the parts, put them on and back on the streets in a matter of two days tops!!
April 1, 2019
As described
Parts as described... fit the way they should.. would purchase again if needed
April 4, 2019
Why are these going bad already
I’m not too happy. I just got my bearings changed a month ago, if that. And now it sounds as if they’re going bad again. What can be done? I spent 150 on bad parts? Really? Not happy
June 29, 2019
A Great to buy your auto parts!
I just found out about 1aauto a very short time ago and I love it, quick and easy to buy. The best thing is the prices! I saved a lot of money!
July 4, 2019
great service
Easy online ordering, fast shipping and supreme parts. Will tell all my friends
July 6, 2019
Great Service
With this order A1 Auto done just fine, but the shipper lost the order. 1 email to A1 Auto customer service and they fixed the problem in minutes and shipped a replacement same day. I have always been satisfied with their products. Now I really like their customer service.
November 4, 2019
1A Auto my "go to" guys.
My new "go to" supplier of after market quality repair parts. Ordering was easy, I had no trouble finding the parts I needed. They were shipped right away and arrived in two or three days. The parts were exactly as pictured and described of good quality and fitment. They are very good at following up and making sure you are satisfied but not in a pushy intrusive way. Just a few emails to assure that it arrived on time and was what I expected and needed. I couldnt be more pleased. It was my first purchase from A1 Auto and look forward to getting the rest of the parts for my project from them. I highly recommend A1 Auto.
January 2, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Would this fit on my impala ss with 18 inch wheels?
Terrance S December 29, 2016
As long as your vehicle has the RPO code JL9 and within the year range 2006 - 2008, or 2009 - 2013 then these will fit your vehicle with the 18 inch wheels.
Alex P December 29, 2016
I have 2098 Grand Prix gxp 5.3l would this fit my car?
Ryan J August 22, 2019
This is able to fit for a 2008 model as long as your vehicle also has ABS. Please let us know if you have any further questions.
Emma F August 22, 2019

Fits the following Makes:

Year Make Model Description
2005-2008Buick Allure Buick Allure with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2009Buick Allure Buick Allure Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2005-2008Buick LaCrosse Buick LaCrosse with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2009Buick LaCrosse Buick LaCrosse Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2005Buick Terraza Buick Terraza Front Wheel Drive with 4 Bolt Flange Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2006-2008Chevy Impala Chevy Impala with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2009-2013Chevy Impala Chevy Impala Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2006-2007Chevy Monte Carlo Chevy Monte Carlo with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2005Chevy Uplander Chevy Uplander Front Wheel Drive with 4 Bolt Flange Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2004-2008Pontiac Grand Prix Pontiac Grand Prix with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2005Pontiac Montana SV6 Pontiac Montana SV6 Front Wheel Drive with 4 Bolt Flange Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2005Saturn Relay Saturn Relay Front Wheel Drive with 4 Bolt Flange Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set

Part Interchange

Brand Label Part Number
ACDelco FW293MX
ACDelco FW128
ACDelco FW293
ACDelco FW116
Chicago Rawhide BR930149
Chicago Rawhide BR930548K
Delphi 12413068
Delphi 7467564
Drive Tech America NT513179
GMB 730-0055
General Motors 88964168
General Motors 12413035
General Motors 12429203
General Motors 88964968
General Motors 12429205
General Motors OEM 12429203
General Motors OEM 12429205
General Motors OEM 88964168
General Motors OEM 12413035
General Motors OEM 88964968
MOOG Hub Assemblies 513179
Mevotech H513179
Raybestos 713179
Raybestos 713199
Raybestos Brakes 713179
Raybestos Brakes 713199
SKF BR930149
SKF BR854
SKF BR930548K
SKF BAR-5124
Timken 513179

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHS00617
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53658