Chevy Buick Pontiac Olds Front Strut Assembly Pair - 1ASSP00208

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

Our direct fit gas-charged strut assemblies help to restore your vehicle’s handling and ride quality to just like new.

Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut (1:30)
    • Spray the lower and higher strut bolts with penetrating oil
    • Remove the two of the upper 15mm strut bolts
    • Remove the two 21mm nuts from the bottom of the strut and knuckle
    • Hammer the bottom of the strut to loosen the bolts
    • Remove the nuts and hammer the bolts out
    • Pull the wheel knuckle forward and push the strut back
    • Remove the two of the upper 15mm strut bolt
    • Remove the rear shock strut
  3. step : Dissembling the Front Strut (3:10)
    • Spray the top bolt on the strut with penetrating oil
    • Place the spring compressors on either side of the spring
    • Tighten each back and forth a little while alternating sides
    • Remove the nut at the top of the strut with a strut socket and T47 Torx bit
    • Pull the mount plate from the top of the strut free
    • Remove the spring
    • Pull the boot up and off
  4. step : Assembling the Front Strut (5:07)
    • Push down on the strut and remove the packing clip
    • Remove the nut and pull the clip free
    • Hammer the clip on the old strut that holds the gasket
    • Place the gasket onto the new strut
    • Replace the boot
    • Insert the spring into its notch on the strut
    • Push the plate and mount onto the strut
    • Push down on the strut and insert a 47 Torx bolt
    • Loosen each of the compressors bit by bit while alternating sides
    • Repeat until the spring compressors pull free
  5. step : Inserting the Front Strut (6:51)
    • Insert the strut into place
    • Replace the upper 15mm strut bolts by hand
    • Push down on the knuckle and place the strut behind it
    • Push the strut onto the knuckle
    • Insert the 21mm bolts into the bottom of the strut and knuckle
    • Hammer the 21mm bolts in and tighten them
    • Torque the 21mm bolts to 130 ft/lbs
  6. step : Reattaching the Wheel (8:48)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Tighten the three 15mm bolts at the top of the strut
    • Tighten the lug nuts to 30 ft/lbs
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack

  • Hex Wrenches

  • 6mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Strut Spring Compression Tool

  • Star Drivers & Sockets

  • T47 Torx Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2005-2009Buick Allure Buick Allure Front Strut Assembly Pair
1997-2005Buick Century Buick Century Front Strut Assembly Pair
2005-2009Buick LaCrosse Buick LaCrosse Front Strut Assembly Pair (excluding Super Models)
1997-2004Buick Regal Buick Regal Front Strut Assembly Pair
2000-2013Chevy Impala Chevy Impala Front Strut Assembly Pair
2000-2007Chevy Monte Carlo Chevy Monte Carlo Front Strut Assembly Pair
1997-2005Chevy Venture Chevy Venture Front Strut Assembly Pair
1997-2004Oldsmobile Silhouette Olds Silhouette Front Strut Assembly Pair
1997-2003Pontiac Grand Prix Pontiac Grand Prix Front Strut Assembly Pair
1999-2005Pontiac Montana Pontiac Montana Front Strut Assembly Pair
1997-1999Pontiac Trans Sport Pontiac Trans Sport Front Strut Assembly Pair
Part 1ASSP00208
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.