Replaces

Chevy Buick Pontiac Cadillac Olds Front Wheel Bearing & Hub Assembly Pair Timken 513017k

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Quantity:   Pair

TIMKEN HUB ASSEMBLY: 513017K (PAIR)

Specifications:

  • Brand New Timken Hub Assemblies
  • Comes as a PAIR:
    • Includes both the RH (Passenger) & LH (Driver) side FRONT
  • Direct replacement
  • Replaces OE# 7470014
  • Fits RH or LH FRONT
  • Built to strict quality control standards

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Hex Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Perfect Replacement
I recently bought and installed the wheel bearings. They seem to be a well built product so far and were easy to install. The video by 1A Auto was perfect to watch while replacing the part.
March 25, 2016
Hub Assembly
Over the past years I have come to respect 1A Auto for their quick deliveries and quality of their products I have purchased. Not to mention the how to videos that have built my confidence in my ability to perform the simple replacement parts. My resent purchase and installation was the bearing hub assembly on my 2004 Chevy Cavalier. The hub assembly was delivered in 2 days and the installation was easy. I got a chuckle on one of the videos that gave tips on removing the hub for those folks who live in Rustville. I live in central New York which qualifies as Rustville. I must have watched the videos a half dozen times. Thanks 1A Auto Paul Marciniak
April 23, 2017
High quality
I was impressed with how fast I received my order of Timken hubs!! And the quality was also impressive compared to the neighborhood automotive box stores!! I would recommend you buy these from 1aauto
April 18, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1984-1989Buick Skyhawk Buick Skyhawk Front Wheel Bearing & Hub Assembly Pair
1988-1997Buick Skylark Buick Skylark Front Wheel Bearing & Hub Assembly Pair
1985-1987Buick Somerset Buick Somerset Front Wheel Bearing & Hub Assembly Pair
1984-1988Cadillac Cimarron Cadillac Cimarron Front Wheel Bearing & Hub Assembly Pair
1987-1996Chevy Beretta Chevy Beretta Front Wheel Bearing & Hub Assembly Pair
1984-2004Chevy Cavalier Chevy Cavalier Front Wheel Bearing & Hub Assembly Pair
1987-1996Chevy Corsica Chevy Corsica Front Wheel Bearing & Hub Assembly Pair
1992-1998Oldsmobile Achieva Olds Achieva Front Wheel Bearing & Hub Assembly Pair
1985-1991Oldsmobile Cutlass Calais Olds Cutlass Calais Front Wheel Bearing & Hub Assembly Pair
1984-1987Oldsmobile Firenza Olds Firenza Front Wheel Bearing & Hub Assembly Pair
1984Pontiac 2000 Pontiac 2000 Front Wheel Bearing & Hub Assembly Pair
1985-1998Pontiac Grand Am Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair
1984-1994Pontiac Sunbird Pontiac Sunbird Front Wheel Bearing & Hub Assembly Pair
1995-2005Pontiac Sunfire Pontiac Sunfire Front Wheel Bearing & Hub Assembly Pair
Only 2 left in stock
Part TKSHS00008
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Timken
Brand #: 513017k