Replaces

Chevy Buick Pontiac Cadillac Olds Front Driver or Passenger Side Wheel Bearing & Hub Assembly TRQ

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part number: 7470014
  • Direct replacement
  • Built to strict quality control standards
This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

BHA53901 Axle / Spindle Nut Torque Specification

  1. step : Remove wheel. (1:13)
    • While your car is still on the ground, use your socket to loosen and remove the center hub nut.
    • Loosen your lug nuts and jack up the car.
    • Remove the lug nuts with your socket and ratchet.
    • Remove the wheel and set aside.
  2. step : Remove the brakes (1:25)
    • Raise and secure your car.
    • Remove the two bolts, pull off the caliper and then the rotor.
  3. step : Remove hub (3:50)
    • Remove the T55 torx bolts.
    • Spray the backs with penetrating oil to help.
    • Separate the hub from the backing plate.
    • Clean up with a wire brush.
    • Remove the hub nut.
    • Tap the axle with a hammer to loosen it and then use the hammer to hammer the hub off the axle.
  4. step : Replace hub (5:20)
    • Clean up the steering knuckle with a wire brush.
    • Use some anti-seize or penetrating oil to make future hub replacement easier.
    • Put position your new 1A Auto hub in place.
    • Secure the T55 torx bolts and nuts and tighten to 60 ft lbs.
    • Put the hub nut back on.
  5. step : Put brakes and wheel back on (7:40)
    • For more detailed instructions on reassembling the brakes consult our other videos.
    • Make sure to use a star pattern when putting your wheel lugs back on.
    • Tighten the hub nut to 144 ft lbs.
    • Tighten the lugs to 75 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer
  • Wire Brush

  • Hex Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 30mm Socket

  • Star Drivers & Sockets

  • T55 Torx Socket

4.40/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
1
0
0
wheel bearing
part arrived on a timely manner.i watched your videos on how to install and it went very well.i really like your install videos and would encourage you to do more.
July 28, 2017
Great
I order my parts from this website and they always come on time right to my door no hassles and in a timely manner. I like that the parts are always what i order and in perfect quality. Thanks guys
December 27, 2018
NEED MORE INFO
THE WHEEL BEARING/HUB ASSY COMES WITH EXTRA PARTS (RUBBER RING AND A METAL RETAINER) THAT DO NOT GO WITH ALL APPLICATIONS. I WISH THEY HAD SOME INFORMATION TO THAT EFFECT IN THE DESCRIPTION OR IN THE BOX.
March 11, 2019
50/50
One part steal working the otter one has broken apart bearings fall out in hand when taken apart after changing shock thinking that other is going to go
June 2, 2019
Works Fine
Installation was simple with the correct tools and following the directions in the video. There are extra parts that are unnecessary for a 1998 Chevy Cavalier but just toss them to the side. Ive driven about 50 miles on it so far including speeds up to 80 mph and it is still working just fine, hopefully it lasts! No more groaning while turning and squeaking. I thought I had a power steering problem or a brake problem but it was just my old hub assembly.
March 2, 2020
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
1984Buick Skyhawk Buick Skyhawk with 12mm Attaching Bolts Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1989Buick Skyhawk Buick Skyhawk Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1986-1998Buick Skylark Buick Skylark Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1987Buick Somerset Buick Somerset Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1984Cadillac Cimarron Cadillac Cimarron with 12mm Attaching Bolts Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1988Cadillac Cimarron Cadillac Cimarron Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1987-1996Chevy Beretta Chevy Beretta Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1984Chevy Cavalier Chevy Cavalier with 12mm Attaching Bolts Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-2005Chevy Cavalier Chevy Cavalier Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1987-1996Chevy Corsica Chevy Corsica Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1992-1998Oldsmobile Achieva Olds Achieva Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1987Oldsmobile Calais Olds Calais Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1984Oldsmobile Firenza Olds Firenza with 12mm Attaching Bolts Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1988Oldsmobile Firenza Olds Firenza Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1984Pontiac 2000 Pontiac 2000 with 12mm Attaching Bolts Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1998Pontiac Grand Am Pontiac Grand Am Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1985-1994Pontiac Sunbird Pontiac Sunbird Front Driver or Passenger Side Wheel Bearing & Hub Assembly
1995-2005Pontiac Sunfire Pontiac Sunfire Front Driver or Passenger Side Wheel Bearing & Hub Assembly

Part Interchange

Brand Label Part Number
Timken 513017K

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Part 1ASHF00017
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53901