Replaces

Chevy Blazer S10 S10 Pickup Headlight Driver Side - 1ALHL00287

Specifications

  • Fits LH (Driver Side)
  • Replaces dealer part number: 16526217
  • Includes lens, housing, and mounting panel
  • Bulbs not included
This headlight is a great replacement and has good cost savings over a headlight from the dealer.
Fit guaranteed
  • This headlamp will install just as your original does. You can use your existing hardware and wiring harnesses.
  • Save time and money with a direct fit. No trips to the hardware store or extra time trying to get the wiring to hookup.
Quality
  • 1A Auto has the most comprehensive warranty.
  • If this headlight should fail to provide satisfactory performance you may exchange it.
  • 1A Auto Headlights are guaranteed to pass inspections in all 50 states. DOT (U.S. Dept. of Transportation) and SAE (Society of Automotive Engineers) approved.
Value
  • Replacing a discolored, scratched, dull or damaged headlight with a headlight from 1A Auto can increase your resale value by up to 10%.
Safety
  • A new headlight can provide you with up to 50% more illumination than a dull, yellowed, sandblasted, broken or scratched headlight.
    • 1A Auto headlights can help you see farther at night and in poor driving conditions.
    • A new headlight from 1A Auto can make you more visible to other traffic during heavy rain or wintry weather.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Handling the Bulbs (0:57)
    • Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb.
    • Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.
  2. step : To Replace the headlight bulbs or headlight assembly (0:58)
    • Open the hood and secure.
    • Pull up on the two tabs anchoring the head light assembly.
    • Unplug and replace the bulbs or unplug the harness to replace the head light assembly.
  3. step : Preliminarily aim your headlights (2:17)
    • Match the adjustor screws on the headlight assembly to match the old head light assembly.
  4. step : Install the headlight assembly. (3:00)
    • Plug in the harness and bulbs and line up your headlight assembly into place.
    • Push down the two tabs to anchor the head light assembly.
  5. step : Final aim of headlights (4:55)
    • Use a screwdriver to adjust the headlights.
    • The concentration of the beam should be 1 inch less than the height of the headlights on the vehicle 20 feet away, and straight on the high beams.
    • Close the hood and enjoy your new 1A Auto headlight assemblies and/or bulbs.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(06:11 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver



This part replaces:

  • Hollander 114-02715AL
  • Partslink GM2502172
  • OE # 16526217
  • TYC 20-5238-00-1
  • DEPO 332-1164L-PFU

Vehicle Fit

  • 1998-2005 Chevy Blazer S10 Headlight Driver Side
  • 1998-2004 Chevy S10 Pickup Headlight Driver Side
Part #: 1ALHL00287

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More