1AESB00067-Chevrolet Pontiac Saturn Serpentine Belt

Replaces

Chevrolet Pontiac Saturn Serpentine Belt DIY Solutions

1AESB00067

This part replaces:

  • OE # 12577770
  • OE # 12577771
  • DIY Solutions BEP00332
FREE SAME DAY SHIPPING
Save 39%
List: $56.95 Save: $22.00
Only 3 left in stock
Part 1AESB00067
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BEP00332
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Wear and Tear

This item is backed by a 60-day warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. This warranty covers the cost of the part only.

  1. step : Removing the Coolant Tank (0:41)
    • Remove the 10mm nuts holding the coolant tank
    • Pull the coolant tank up and out
  2. step : Removing the Serpentine Belt (1:07)
    • Unbolt the belt bracket with a 13mm socket
    • Familiarize yourself with the route of the serpentine belt
    • Insert the 3/8 inch drive ratchet into the tensioner
    • Turn the tensioner clockwise to loosen the belt
    • Pull the belt off the alternator
    • Release the tensioner
    • Pull the belt off by hand
  3. step : Reinstalling the Serpentine Belt (2:43)
    • Loop the belt around the crank pulley
    • Bring it around the power steering pulley
    • Bring it around the idler pulley
    • Bring it around the A/C Pulley
    • Bring it around the belt tensioner
    • Bring it around the water pump
    • Pull the tensioner clockwise with the 3/8 inch ratchet
    • Pull the belt over the alternator
    • Release the tensioner
    • Place the 13mm bolt back into the bracket
  4. step : Reinstalling the Coolant Tank (5:04)
    • Place the coolant tank into the groove and connect the pin
    • Place the top tabs over the studs and tighten the 10mm nuts

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 13mm Socket
  • 10mm Socket

  • Wrenches - SAE

  • 3/8 Inch Wrench


Fits the following Makes:

Year Make Model Description
2006-2010Chevrolet Impala Chevrolet Impala V6 3.5L (8th Vin Digit N) Serpentine Belt
2006Chevrolet Impala Chevrolet Impala V6 3.9L (8th Vin Digit 1) Serpentine Belt
2006-2011Chevrolet Impala Chevrolet Impala V6 3.5L (8th Vin Digit K) Serpentine Belt
2007Chevrolet Impala Chevrolet Impala V6 3.9L (8th Vin Digit R) Serpentine Belt
2008Chevrolet Impala Chevrolet Impala V6 3.9L (8th Vin Digit 3) Serpentine Belt
2009-2011Chevrolet Impala Chevrolet Impala V6 3.9L (8th Vin Digit M) Serpentine Belt
2006-2007Chevrolet Malibu Chevrolet Malibu SS V6 3.9L (8th Vin Digit 1) Serpentine Belt
2007Chevrolet Malibu Chevrolet Malibu V6 3.5L (8th Vin Digit N) without Electronic Control Steering Serpentine Belt
2008Chevrolet Malibu Chevrolet Malibu Classic LS V6 3.5L (8th Vin Digit N) without Electronic Control Steering Serpentine Belt
2008Chevrolet Malibu Chevrolet Malibu Classic LT V6 3.5L (8th Vin Digit N) without Electronic Control Steering Serpentine Belt
2009-2010Chevrolet Malibu Chevrolet Malibu V6 3.5L (8th Vin Digit N) Serpentine Belt
2010Chevrolet Malibu Chevrolet Malibu V6 3.5L (8th Vin Digit K) Serpentine Belt
2006Chevrolet Monte Carlo Chevrolet Monte Carlo V6 3.9L (8th Vin Digit 1) Serpentine Belt
2006-2007Chevrolet Monte Carlo Chevrolet Monte Carlo V6 3.5L (8th Vin Digit N) Serpentine Belt
2006-2007Chevrolet Monte Carlo Chevrolet Monte Carlo V6 3.5L (8th Vin Digit K) Serpentine Belt
2006-2009Pontiac G6 Pontiac G6 V6 3.9L (8th Vin Digit 1) Serpentine Belt
2007-2009Pontiac G6 Pontiac G6 V6 3.5L (8th Vin Digit N) Serpentine Belt
2009-2010Pontiac G6 Pontiac G6 V6 3.5L (8th Vin Digit K) Serpentine Belt
2007-2008Saturn Aura Saturn Aura V6 3.5L (8th Vin Digit N) Serpentine Belt
2008-2010Saturn Vue Saturn Vue V6 3.5L (8th Vin Digit N) Serpentine Belt

Part Interchange

Brand Label Part Number
DIY Solutions BEP00332

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BEP00332
Product Reviews
4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Serpentine belt on my 08 Impala
It measured out slightly longer than the original but still fits tight. The tensioner has enough spring to keep it.
September 9, 2018
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Pontiac Saturn Serpentine Belt DIY Solutions-1AESB00067 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.