1ASFK01895-Chevrolet Pontiac Saturn Front Inner & Outer 4 Piece Tie Rod Set


Chevrolet Pontiac Saturn Front Inner & Outer 4 Piece Tie Rod Set TRQ

Save 20%
List: $55.95 Save: $11.00
Part 1ASFK01895
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA55050

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   4 Piece


  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

No modifications, all the parts needed in one kit Direct fit - easy install, pre-greased, no maintenance required Improved ride comfort and longer life

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    It is recommended to seek a professional alignment after completing this repair.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:08)
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • Make note of this measurement
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Remove the 18mm nut from the outer tie rod end
    • Loosen the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Pull the outer tie rod out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (1:55)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Place vise grip pliers to hold the other part of the ball joint
    • Fasten the 18mm nut onto the outer tie rod with a socket
    • Place the pliers on the bottom of the bolt
    • Tighten the nut with an 18mm wrench
    • Tighten the nut that holds the outer tie rod to the inner tie rod with an adjustable wrench
    • Measure the distance from the boot of the inner tie rod to the edge of the outer tie rod
    • This should be the same as the measurement noted in Step 2
  4. step : Reattaching the Wheel (3:29)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Measuring Tape
  • Jack Stands
  • Hammer
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 18mm Wrench

  • Wrenches - SAE

  • 13/16 Inch Wrench

Fits the following Makes:

Year Make Model Description
2004-2012Chevrolet Malibu Chevrolet Malibu Front Inner & Outer 4 Piece Tie Rod Set
2005-2010Pontiac G6 Pontiac G6 Front Inner & Outer 4 Piece Tie Rod Set
2007-2009Saturn Aura Saturn Aura Front Inner & Outer 4 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS01913
DIY Solutions SUS07656
DIY Solutions SUS07657
General Motors 22687089
General Motors 22687091
General Motors 15944090
General Motors 15944097
General Motors 15944072
MOOG ES800086
MOOG EV80988
MOOG Chassis Products ES800086
MOOG Chassis Products EV80988

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA55050
Product Reviews
4.73/ 5.0 22
22 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
December 4, 2017
The parts fit great. Easy to install. Will use them in the future. Great website.
Exactly What I Ordered
March 31, 2018
I have yet to install the parts I ordered on my vehicle. Although I give an A+ for the ease of ordering and the timeliness in which my parts arrived. I can't wait to get them on my car and let you know how great they are. :)
Quality parts
April 25, 2018
Parts are just as good as napa auto parts but cheaper
Quality Parts Cheap Prices
April 28, 2018
I shop at 1A Auto the same reason I shop at Harbor Freight good products with cheap prices... I have never gone wrong purchasing anything from here parts came quick and fit nicely
Tire end rod
May 22, 2018
purchased a set of tire end rods, very satisfied and for that price you can’t beat it. I will be purchasing a set for my wife real soon
Tie rod
May 25, 2018
Ordered these parts for mother’s vehicle. Shipped and received quickly and no issues with installation.
On point
July 12, 2018
What can I say this site is awesome,the parts are original & beautifully priced.Plus they step by step videos to help you on your car & save you money.??
Tie rods
August 1, 2018
Very good quality parts. matched up perfectly to old parts and install was very easy.
Not the best I've used
September 30, 2018
I buy many products from 1A Auto and 99% of them are excellent. These tie rod ends didn't last five thousand miles. The boot is torn on both outer tie rod ends. Do not seem to be the high quality that I expect and usually get from 1A Auto. Will try to find a different brand elsewhere I guess
First time installing tie rods
November 7, 2018
The parts came in brand new and on time . the parts are USA made and handled.. A1 never fails to bringing the best customer service possible with including instructions easy to reas but also includes a picture diagram that made the job much easier no special tools required . just need a good pair of channel locks for inner removal and industrial zip ties for the boot install . thank you A1 after my realignment my car runs smooth as possible.
February 12, 2019
They came on time and was easy to install. Customer service was great I will be purchasing again
Didn't fit 2008 Saturn Astra XR
March 3, 2019
Unfortunately these didn't fit on my 08 Saturn Astra XR. That being said, posting 3 starts because of the fantastic customer service. 1A Auto was quick to remedy the problem! I will be trying them again in the future.
Thankful customer
July 13, 2019
I recently discovered 1A when looking for parts for my toyota 4runner. The price was great and the parts fit perfect. Since then i have purchased parts for my other 2 vehicles and everything worked out great. Thanks 1A
Tie rods for 2008 Malibu
July 15, 2019
Quick delivery, great product. Had my car back up and working in less than a week. I’ve referred you company to friends.
Happy with parts
August 11, 2019
So good so far, make sure to plan to align afterwards
August 17, 2019
My experience was great on time no issues at all and great price
Good parts
October 8, 2019
Just in time to do my job
October 12, 2019
Great worked out fine, can't say that about the two purchases I made after this purchase
Great price and product
November 4, 2019
Highly recommend great product
Awesome products
April 23, 2020
I would definitely recommend 1AAUTO to anyone, they've got great quality products. I was very pleased with my purchase, they were of great quality and at a very reasonable price. They worked great after install and fit perfectly.
April 26, 2020
Oem fit
May 4, 2020
Fit perfect great price, received parts faster than I expected.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who makes these tie rods? And is there a need for a special tool for the inside tie rods?
October 15, 2016
I do not recall the mfg., but the quality was excellent. A very good deal.. Yes, a special tool was required. I believe I borrowed it from Advance Auto. No charge, just a deposit, that was returned to my credit card. My son hit a chuck hole. Damaged wheel bearing, and inter tie rod housing cracked. Once completed, worked great. Good Luck
October 15, 2016
I don't know who makes them, yes you need an inner tie rod removal set. The tools can be rented from your local auto parts store
October 15, 2016
I think the ones I recived were MOOG. I rented the special tool from local parts store for free with a deposit. Most parts stores I have seen carried the tool to rent. Tool comes with multiple heads to adjust to the inner tie rod you buy and was easy to use. Between the little effort and tool rental it was well worth doing the job myself.
October 15, 2016
ON a gm model you need a special tool for the inner tie rod. Outer is just a wrench. As for who make them im not sure,but i have 15k miles on them and the seem fine..
October 15, 2016
They say you need a special inner tool but as soon as you remove the protection boot then you expose the inner tierod amd you can notice two smooth grooves on opposite sides .. You get a good pair of channel locks and a lil elbow greese it pops off so smoothly and then when you install dont forget to greese the inner tie rod and shazaam! Your good to go. I Recommend buying the industrial size zip ties to go around the boot . enjoy
November 7, 2018
What is the torque specs for the tie rods?
January 1, 2019
The outer tie rod nut should be 18 lb ft, and the inner is 74 lb ft.
January 2, 2019
Return policy?
January 22, 2019
If you should decide that you do not want an item that is still in brand new condition you may return it to us within 60 days of the original purchase date. Please fill out our Online Return Form, email us or call us first to arrange the return. Upon receipt we will issue a full refund.
January 22, 2019
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet Pontiac Saturn Front Inner & Outer 4 Piece Tie Rod Set TRQ-1ASFK01895 does not fit your:

Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.