1AZCC00168-Chevrolet Pontiac Olds Combination Switch

Replaces

Chevrolet Pontiac Olds Combination Switch DIY Solutions

1AZCC00168

This part replaces:

  • Hollander 629-00347 629-00228
  • Standard Motor Products DS-774
  • OE # 26073715 26084694
  • DIY Solutions BSS00625
FREE SAME DAY SHIPPING
Save 34%
List: $112.95 Save: $38.00
Part 1AZCC00168
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: BSS00625

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Beginning the Repair (0:05)
    • This is Part 2 of a two part video
    • Please consult Part 1 for prior instructions
    • Perform the steps outlined in Part 1
  2. step : Fastening the Turn Signal Switch (0:20)
    • Line up the horn button as you move the switch into place
    • Start the top screw
    • Start the bottom screw
    • Tighten the top screw
    • Tighten the bottom screw
  3. step : Connecting the Wiring (2:51)
    • Pass the cruise control wire over the steering colum
    • Connect the cruise control wire
    • Connect the wiring harness
    • Slide the black harness into place
    • Slide the grey harness into place
    • Connect the wiring harness
    • Tighten the wiring harness bolt
    • Reattach the plastic wiring clip
    • Secure the wires with wire tires
  4. step : Reattaching the Steering Column Trim (4:36)
    • Replace the top steering column cover
    • Make sure the shift boot is placed correctly
    • Insert the top cover screws with the E5 bit
    • Insert the ignition lock cylinder with the triangle lock tab pointing up
    • Hook the lower steering column trim onto the upper steering column trim
    • Make sure to place the lower steering column trim around the shift boot
    • Clip the upper and lower trim together
    • Reattach the steering tilt lever
  5. step : Reattaching the Dash Panels (6:37)
    • Lower the steering wheel
    • Push the upper dash panel into place
    • Clip the dash panel at the bottom
    • Clip the dash panel at the top
    • Press the radio/heater panel into place
    • Insert the two T25 screws in the lower steering column trim
    • Install the access panel with the two locating pins
    • Clip the top of the access panel into place
    • Insert the three 7mm screws at the bottom of the access panel
    • Push in the push pins
    • Reconnect the battery

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Wire Ties

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

  • Specialty Tools

  • Bent Tipped Awl

  • Star Drivers & Sockets

  • T25 Driver
  • E5 Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this item come with wire harness?
John T March 28, 2018
Like the picture shows. I havent installed it yet.
Ross W March 29, 2018
This part comes with the harness that is pictured only. Thank you!
Adam G March 29, 2018

Fits the following Makes:

Year Make Model Description
1997-2005Chevrolet Venture Chevrolet Venture with Cruise Control Combination Switch
1997-2004Oldsmobile Silhouette Olds Silhouette with Cruise Control Combination Switch
1997-1999Pontiac Grand Prix Pontiac Grand Prix with Cruise Control Combination Switch
1999-2004Pontiac Montana Pontiac Montana with Cruise Control Combination Switch
1997-1999Pontiac Trans Sport Pontiac Trans Sport with Cruise Control Combination Switch

Part Interchange

Brand Label Part Number
DIY Solutions BSS00625

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: BSS00625
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
REPLACEMENT SWITCH / EASY INSTALL
Combo switch replacement was VERY easy, and VERY good quality
October 19, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Pontiac Olds Combination Switch DIY Solutions-1AZCC00168 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.