Chevrolet Grille

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

step : Removing the Grille (0:36)

• Pry off the seven plastic clips from the radiator cover with a flat blade screwdriver
• Pull off the radiator cover
• Remove the 10mm bolt from the top of the grille
• Loosen the four Phillips head clips from the grille
• Pull off the grille by hand

step : Preparing the new Grille (1:58)

• Push in the tabs on either side of the badge
• Pull the badge off of the old grille
• Push the clips onto the new grille
• Push the badge into the new grille
• Push the Phillips head clips into the new grille

step : Installing the New Grille (2:56)

• Push the new grille into place
• Tighten the Phillips head clips
• Line up the grille crossbar
• Push the grille crossbar in
• Insert the 10mm bolt into the top of the grille
• Put the radiator cover into place
• Push the seven plastic clips into the radiator cover