1AHTF00024-Chevrolet GMC Front 4 Piece CV Axle Shaft Set


Chevrolet GMC Front 4 Piece CV Axle Shaft Set TRQ


Part Details

  • Bearing Type: Ball Bearing
  • Includes: Hub Assemblies
  • Set Quantity: 4 Piece

This part replaces:

  • A1 Cardone 66-1277
  • A1 Cardone 66-1278
  • Reference Number 513124
  • Dorman 4110303
  • Hollander 538-01459
  • Hollander 447-02254L
  • Hollander 447-02253R
  • TRQ BHA52940
  • OE # 12413045
  • OE # 26055053
  • OE # 26055049
Save 22%
List: $306.95 Save: $67.00
Part 1AHTF00024
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: BHA52940
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Includes:   Hub Assemblies
  • Set Quantity:   4 Piece
  • Bearing Type:   Ball Bearing

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Install the new hub (1:11)
    • Apply the O ring to the new hub
    • Use a grease gun to apply grease to the lower ball joint, upper ball joint and tie rod end.
    • Feed the ABS wiring for the hub through the dust guard and mount the hub.
    • Thread in the three bolts and tighten them up evenly.
    • Torque these bolts to 65 ft lbs.
    • Clip the wiring harness up using the 10 and 13 mm bolts to secure the clips.
    • Connect the wiring harness.
  2. step : Assemble the brakes (4:10)
    • Put the rotor on the hub.
    • Mount the caliper bracket, pads and caliper.
    • Torque the bolts on the caliper to 50-60 ft lbs.
  3. step : Put the wheel back on (5:04)
    • Put the hub nut back on.
    • Put the wheel back on and thread the lug nuts.
    • Lower the vehicle.
    • Torque the hub nut to 90 ft lbs.
    • Use a star pattern to torque the lug nuts to 75 ft lbs.
    • Put the cap and lug nut covers back on.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 15mm Socket
  • 16mm Socket
  • 10mm Socket
  • 34mm Socket
  • 18mm Socket
  • 17mm Socket
  • 11mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
are the axles the same length?
Les K January 30, 2016
Hello, The axles are not the same length in this kit.
Brian F February 2, 2016
How many splines do the shafts have?
Anthony S April 22, 2017
Dont know but, these parts are the correct ones for the Zr2 "high and wide" suspension on s10s
John D April 22, 2017
the wheel bering will mach up to the shaft they are matched old and new shafts are the same
Noll N April 22, 2017
I really couldnt tell you sorry. I took the parts to a mechanic and had him put them on for me.
Matt R April 23, 2017
Our parts are made to OE spec, so as long as you purchase based on your vehicle and specific fit details they will match factory exactly.
Tim K April 23, 2017
Not sure how many splines. They fit perfectly on a 2000 Chevrolet S10 Ext cab 4x4 ZR2.
Jeff G April 24, 2017
Dose wheel hub bearing have gear?
Brian T May 2, 2017
Are you referring to an ABS tone ring? If so then no, the hubs do not have a tone ring.
Tim K May 2, 2017
Will this fit a non-zr2 model blazer?
Brian B August 17, 2017
These are specific to the ZR2 model Blazers. Please view our other listings for the appropriate replacement parts.
Alex P August 17, 2017
I have a question Im looking for a CV axle for a 2003 ZR2 S10 CHEVY TRUCK HAS TO BE 24 INCHES?
BB K April 5, 2019
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicles OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Peter L April 6, 2019

Fits the following Makes:

Year Make Model Description
1997-2005Chevrolet Blazer Chevrolet Blazer with RPO Code ZR2 (High Wider Performance Chassis) Front 4 Piece CV Axle Shaft Set
1997-2004Chevrolet S10 Pickup Chevrolet S10 Pickup with RPO Code ZR2 (High Wider Performance Chassis) Front 4 Piece CV Axle Shaft Set
1997-2001GMC Jimmy GMC Jimmy with RPO Code ZR2 (High Wider Performance Chassis) Front 4 Piece CV Axle Shaft Set
1997-2001GMC Jimmy Full Size GMC Jimmy Full Size with RPO Code ZR2 (High Wider Performance Chassis) Front 4 Piece CV Axle Shaft Set
1997-2004GMC S-15 Sonoma GMC S-15 Sonoma with RPO Code ZR2 (High Wider Performance Chassis) Front 4 Piece CV Axle Shaft Set

Part Interchange

Brand Label Part Number
ACDelco FW317
ACDelco FW127
Beck / Arnley 051-6170
Beck/Arnley 051-6170
Cardone New 66-1277
Cardone New 66-1278
Cardone Select 66-1278
Cardone Select 66-1277
Chevrolet 26055053
Chevrolet 26055049
Chicago Rawhide BR930097
Drive Tech America NT513124
GMB 730-0001
GSP NCV10206
GSP NCV10207
General Motors 26055049
General Motors 7470608
General Motors 12413045
General Motors 7467139
General Motors 26055053
General Motors 12413046
General Motors 7470607
General Motors 7470537
General Motors OEM 26055049
General Motors OEM 26055053
General Motors OEM 12413046
General Motors OEM 7470608
General Motors OEM 7470537
General Motors OEM 12413045
General Motors OEM 7470607
General Motors OEM 7467139
Isuzu 8-12413-045-0
MOOG Hub Assemblies 513124
Mevotech H513124
Raybestos 713124
Raybestos Brakes 713124
SKF BAR-5130-A
SKF BR930097
Timken 513124

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: BHA52940
Product Reviews
There are no reviews for this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Chevrolet GMC Front 4 Piece CV Axle Shaft Set TRQ-1AHTF00024 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.