ACFPU00024-Chevrolet GMC Cadillac Fuel Pump & Sending Unit Assembly

Replaces

Chevrolet GMC Cadillac Fuel Pump & Sending Unit Assembly ACDelco MU1738

ACFPU00024

This part replaces:

  • Hollander 323-01426
  • OE # 19180099
FREE SAME DAY SHIPPING
Save 35%
List: $483.95 Save: $169.00
Only 1 left in stock
Part ACFPU00024
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

AC DELCO
Brand #: MU1738

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Mounts in fuel tank
  • Complete module assembly
  • Assembly includes the following parts:
    • Electric Fuel Pump
    • Plastic module
    • Float
    • Strainer - Internal
  • Correct electrical connections
  • Replaces dealer part number: 19180099
  • Built to strict quality control standards
  • Fits models WITHOUT Robust Fuel System

 

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Disconnecting the Fuel Hoses (0:41)
    • Lift and secure the vehicle
    • Loosen the two hose clamps with an 8mm socket and ratchet
    • Pull the hoses free, using a pry bar if necessary
  2. step : Removing the Fuel Tank Straps (1:41)
    • Support the fuel tank with a jack stand
    • Remove the 15mm bolt from each fuel tank strap
    • Pull off the fuel tank straps
  3. step : Removing the Fuel Tank (2:39)
    • Have an assistant hold one end of the tank
    • Lower the jack
    • Pull the top hose free from its bracket
    • Disconnect the rear hose from the fuel tank
    • Disconnect the rear hose from its brackets
    • Disconnect the fuel pump wiring harnesses
    • Disconnect the fuel pump hoses with pliers
    • Pull the front hoses out of the gas tank
    • Pull the fuel pump hoses out of their brackets
    • Tape over the holes in the fuel tank
    • Lower the fuel tank with the help of an assistant
    • Disconnect the top hose from the fuel tank
    • If the gas tank is too heavy, pour the gas into an appropriate container
  4. step : Removing the Fuel Pump (5:25)
    • Loosen the fuel pump ring with a hammer and screwdriver
    • Pull of the fuel pump ring
    • Pull the fuel pump out of the tank
    • Pour any gas inside the pump into the tank
  5. step : Installing the New Fuel Pump (6:12)
    • Push the float arm onto the new fuel pump
    • Slide the fuel pump hose clips off the old fuel pump with a flat blade screwdriver
    • Slide the fuel pump hose clips onto the new fuel pump with a flat blade screwdriver
    • Put the new fuel pump into the tank
    • Put the fuel pump ring into place
    • Lock the ring into place with a hammer and screwdriver
  6. step : Reinstalling the Fuel Tank (7:14)
    • Lift the fuel tank into place, front first, with the help of an assistant
    • Reconnect the front fuel tank hose
    • Clip the front hose into its bracket
    • Push the rear of the tank up partially
    • Support the tank with the jack
    • Connect the fuel pump hoses
    • Reconnect the fuel pump wiring harnesses
    • Clip the fuel pump hoses into their brackets
    • Connect the rear hose
    • Push the rear hose into its brackets
    • Raise the tank the rest of the way up with the jack
    • Remove the tape from the tank
    • Reconnect the two upper hoses
    • Tighten the two hose clamps with an 8mm socket and ratchet
  7. step : Installing the New Fuel Tank Straps (11:05)
    • Hang the new fuel tank straps in their brackets
    • Insert the 15mm bolt into each fuel tank strap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Assistant
  • Jack Stands
  • Hammer

  • Materials, Fluids, and Supplies

  • Electrical Tape

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket
  • 15mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2003Cadillac Escalade ESV Cadillac Escalade ESV Fuel Pump & Sending Unit Assembly
2002-2003Cadillac Escalade EXT Cadillac Escalade EXT Fuel Pump & Sending Unit Assembly
2002-2003Chevrolet Avalanche 1500 Chevrolet Avalanche 1500 Fuel Pump & Sending Unit Assembly
2002-2003Chevrolet Suburban 1500 Chevrolet Suburban 1500 V8 5.3L (8th Vin Digit T) Fuel Pump & Sending Unit Assembly
2002-2003GMC Yukon GMC Yukon Denali Fuel Pump & Sending Unit Assembly
2002-2003GMC Yukon XL 1500 GMC Yukon XL 1500 V8 5.3L (8th Vin Digit T) Fuel Pump & Sending Unit Assembly

Part Interchange

Brand Label Part Number
DIY Solutions FPU00241

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
AC DELCO
Brand #: MU1738
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Cadillac Fuel Pump & Sending Unit Assembly ACDelco MU1738-ACFPU00024 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.