Replaces
Replaces Nissan Air Filter Housing Clip Nissan OEM 16598-7S000
$12.45
Replaces 1999-04 Toyota Tacoma V6 3.4L Engine Air Box TRQ IMA81814
$129.95
Replaces 2011-19 Dodge Charger Chrysler 300 Engine Air Box TRQ IMA81800
$92.95
Replaces Toyota 4Runner Tacoma Engine Air Box TRQ IMA81813
$89.95
Replaces 2011-19 Dodge Chrysler Lower Engine Air Intake Duct TRQ IMA81802
$59.95
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with our 1996 GMC Sierra K1500 5.7-liter Vortec V8. We're going to show you how to remove and replace your airflow restrictor gauge. This measures the restriction of airflow into your intake manifold and is a easy way to gauge the quality of your air filter without needing to take anything apart.
If you like this video, please click subscribe. We have a ton more information on this and many other vehicles. If you want this part for your truck, you can follow the link down in the description over to 1AAuto.com.
While you will need a new airflow restrictor gauge from 1AAuto.com, there are no tools required for this procedure.
Your airflow restriction gauge is located here right behind your intake air box. Simply wiggle that up and out of its gasket. We're going to replace it with a new GM unit. What this does is it gauges restriction and airflow. This little bar will come down and down and down as the flow gets more restricted.
Once you get down into this little red zone here, you know it's time to change your air filter. Make sure that gauge, there's three of them around the sides. Make sure one of them is facing somewhere that's easy to read. Push the gauge back down into the gasket and push the button on the top to reset it just like you would if you replaced your air filter.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
