1ASFK02577-Chevrolet GMC Buick Saturn Front 4 Piece Strut & Spring Assembly Set

Replaces

Chevrolet GMC Buick Saturn Front 4 Piece Strut & Spring Assembly Set

1ASFK02577

Part Details

  • Includes: Sway Bar Links
  • Set Quantity: 4 Piece

This part replaces:

  • Moog K750155
  • Monroe 172518
  • KYB SR4206
  • OE # 20905104
FREE SAME DAY SHIPPING
Save 13%
List: $290.95 Save: $39.00
Part 1ASFK02577
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA56320

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Includes:   Sway Bar Links
  • Set Quantity:   4 Piece

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Lifetime Warranty

Our quality control process ensures defect-free build and function for as long as you own your car or truck.

Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    It's recommended to seek an alignment after finishing this repair

  1. step : Removing the Wheel (0:47)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Wiper Arm (1:13)
    • Pry off the wiper arm cap with a flat blade screwdriver
    • Remove the 15mm nut from the wiper arm
    • Remove the wiper arm
    • Repeat the process for the other side
  3. step : Removing the Cowl Panel (1:46)
    • Remove the four clips along the cowl panel with a flat blade screwdriver
    • Remove the ground from the cowl panel
    • Pry off the clip near the edge of the windshield
    • Pry off the adhesive pad on either end of the cowl panel
    • Pry off the clip on the driver side of the cowl panel
    • Pull up on the cowl panel to release it from its clips
    • Pull the cowl panel up and off
  4. step : Removing the Front Strut (3:06)
    • Spray the lower and higher strut bolts with rust penetrant
    • Remove the three of the upper 15mm strut bolts and leave the last one loosened
    • Pry out the clip holding the brake line to the strut with a flat blade screwdriver
    • Remove the 18mm nut from the stabilizer link
    • Pull the stabilizer link aside
    • Remove the two 24mm nuts from the bottom of the strut and knuckle
    • Pry the wiring harness off of the strut
    • Thread the 24mm nuts onto the bolts and hammer them to move the bolts
    • Jack up underneath the knuckle
    • Remove the two bolts from the knuckle
    • Pull the strut off the steering knuckle
    • Remove the last 15mm bolt from the strut
    • Remove the strut
  5. step : Disassembling the Strut (5:27)
    • Place the spring compressors on either side of the spring
    • Tighten each back and forth a little while alternating sides
    • Remove the spark plug piece from a 13/16 spark plug socket with a 90-degree pick
    • Remove the nut at the top of the strut with a 7/8 wrench and 13/16 spark plug socket
    • Pull the mount plate from the top of the strut free
    • Remove the spring
    • Pull the boot up and off
  6. step : Assembling the Strut (6:40)
    • Remove the nut from the new strut
    • Replace the boot
    • Insert the spring into its notch on the strut
    • Tighten the bolt onto the new strut
    • Loosen each of the compressors bit by bit while alternating sides
    • Repeat until the spring compressors pull free
  7. step : Inserting the Front Strut (8:35)
    • Insert the strut into place
    • Push down on the knuckle and place the strut behind it
    • Push the strut onto the knuckle
    • Insert the bolts into the bottom of the strut and knuckle
    • Hammer the bolts in and tighten them
    • Torque the bolts to 120 foot-pounds
    • Jack up the strut into place
    • Replace the upper 15mm strut bolts by hand
    • Insert the harness clip in place on the new strut
    • Insert the clip holding the brake line
    • Insert the stabilizer link in place
    • Tighten the 18mm nut to the link
  8. step : Reattaching the Wheel (10:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the three 15mm bolts at the top of the strut
    • Tighten the lug nuts to 45 foot-pounds
  9. step : Reinstalling the Cowl Panel (11:39)
    • Insert any remaining clips into the cowl panel
    • Insert the cowl panel into place
    • Insert the adhesive on either side of the panel
    • Push in the clips along the cowl panel
    • Push on the clip near the edge of the windshield
    • Push in the clip on the driver side of the cowl panel
    • Replace and tighten the ground
  10. step : Reinstalling the Wiper Arm (13:17)
    • Push the wiper arm onto the stud
    • Tighten the 15mm nut to the wiper arm
    • Replace the wiper arm cover
    • Repeat the process for the other side

Tools needed for replacement:

    General Tools

  • Pick
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 22mm Socket
  • 18mm Socket
  • 24mm Socket
  • 21mm Socket
  • 8mm Socket

  • Sockets - SAE

  • 13/16 Inch Spark Plug Socket

  • Specialty Tools

  • Strut Spring Compression Tool

  • Wrenches - Metric

  • 18mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who is the manufacturer?
John M July 26, 2017
The ones i recived was a company called unity struts
C B July 26, 2017
We use multiple vendors based in either China or Taiwan and label them as our own 1A Auto brand parts.
Alex P July 26, 2017

Fits the following Makes:

Year Make Model Description
2008-2012Buick Enclave Buick Enclave Front 4 Piece Strut & Spring Assembly Set
2009-2012Chevrolet Traverse Chevrolet Traverse Front 4 Piece Strut & Spring Assembly Set
2007-2012GMC Acadia GMC Acadia Front 4 Piece Strut & Spring Assembly Set
2007-2010Saturn Outlook Saturn Outlook Front 4 Piece Strut & Spring Assembly Set

Part Interchange

Brand Label Part Number
DIY Solutions SHO00360
DIY Solutions SUS06920
General Motors 20905104
KYB SR4206
KYB Shocks & Struts SR4206
MOOG K750155
MOOG Chassis Products K750155
Mevotech MS50832
Monroe 182518
Monroe 172518
Monroe Shocks & Struts 182518
Monroe Shocks & Struts 172518
Unity Automotive 11680

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA56320
Product Reviews
5.00/ 5.0
10 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
0
0
0
0
Recent experience
I ordered the strut kit for my vehicle and was very impressed with it. The delivery was quick and came with everything needed. I would recommend 1a auto to anyone. Was easy to find what you need. Thank you
August 19, 2018
Struts with springs and stabilizers
Very fast shipping. Perfect fit for my vehicle. Watched installation video. Had all tool ready, installation was quick and easy. Car drives and handles like new.
February 23, 2019
Installation was a breeze
I only replaced my struts about two weeks ago, 1a auto, parts and customer service are like no other, struts just like in their video were a quick Install, no spring tool required, I also replaced my sway bars and tie rods, 1a can bundle them which saved me lots of money, and performance wise, so far so good, good parts and saving money you cant go wrong them.
March 29, 2019
Great experience
I had a very smooth and satisfying experience with a1 auto, from when I ordered to installation, great
April 27, 2019
Perfect fit & Easy install
The strut assembly fits perfect and was really easy to install. My parts arrived the next day and after I borrowed the right tools, install went smoothly and my car is back on the road.
August 26, 2019
Perfect fit
Fast shipping Easy install, replaced the set, one evening with our 7 yr old son. Ride improved.
September 11, 2019
Thank you
Thank you
October 7, 2019
Pretty straight forward
So far so good!! It was very easy to install with minimal tools. Online 1A Auto videos are also very helpful. Thanks again 1 A saved me over 1100 at the shop!!
March 20, 2020
Quality
Quality parts. Perfect fit. Love the videos.
March 22, 2020
Great Product
I bought this strut set after researching others online. I chose 1A Auto for their price and customer service! They made the ordering process simple, sipping was FAST and EASY!! The struts fit without an issue! The ride in my 09 Traverse is fantastic! I would recommend 1A Auto to anyone looking for auto parts!! Not to mention their installation videos are a life saver for the weekend mechanic!
April 17, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Buick Saturn Front 4 Piece Strut & Spring Assembly Set-1ASFK02577 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.