1ASLF00693-Chevrolet GMC Buick Saturn Front Passenger Side Control Arm with Ball Joint

Replaces

Chevrolet GMC Buick Saturn Front Passenger Side Control Arm with Ball Joint TRQ

1ASLF00693

This part replaces:

  • Dorman 522-040
  • Hollander 512-00472R
  • OE # 20774419
  • Moog K621231
  • Moog RK621231
  • TRQ PSA84289
FREE SAME DAY SHIPPING
Save 22%
List: $95.95 Save: $21.00
Part 1ASLF00693
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA84289

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Fits RH (Passenger Side) Front Lower
  • Includes ball joint
  • Direct replacement
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

    We recommend that you replace these in pairs

  1. step : Removing the Wheel (1:00)
    • Remove the hub cap
    • Loosen the lug nuts with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Loosening the Stabilizer Link (1:20)
    • Use rust penetrant where the stabilizer link links to the strut
    • Loosen the 18mm nut with an 18mm wrench and turn an 8mm socket and ratchet clockwise OR
    • Hook a set of locking pliers on the back side of link and remove the 18mm nut with a wrench
    • Move the stabilizer link to the side
  3. step : Removing the Control Arm (2:11)
    • Remove the 24mm nut from the control arm with a socket and breaker bar
    • Remove the 21mm nut from the other end of the control arm and leave the bolt in place
    • Jack up underneath the front of the control arm
    • Remove the 21mm nut from the ball joint
    • If needed, thread the 21mm ball joint nut on and tap the knuckle with a hammer to loosen the control arm
    • Remove one and loosen the second 21mm front mount bolts near the front shaft of the control arm
    • Jack up underneath the stabilizer bar
    • Tap out the 21mm bolt from the control arm with a pry bar
    • Remove the control arm
  4. step : Installing the Control Arm (6:05)
    • Remove the shipping protectors from the front shaft and ball joint
    • Insert the front shaft of the control arm into place
    • Insert the ball joint and rest of control arm into place
    • Raise and jack up the stabilizer bar
    • Tap the 21mm bolt into the rear of the control arm with a hammer
    • Insert the 21mm front mount bolt
    • Tighten the front mount bolts to 70 foot-pounds
    • Insert the 24mm bolt into the control arm
    • Lower the stabilizer bar
    • Insert and preliminarily tighten the 21mm nut
    • Insert and preliminarily tighten the 24mm nut
    • Jack up underneath the front of the control arm
    • Tighten the 21mm nut to the ball joint
  5. step : Tightening the Stabilizer Link (9:18)
    • Insert the stabilizer link into place
    • Insert the 18mm nut until the locking pliers are pinched
    • Insert an 18mm wrench onto the nut
    • Use an 8mm socket and ratchet to pull the stud through
    • Tighten the nut with an 18mm wrench
    • Check so that the ABS wire is in place
    • Lower the car into a level position with a jack underneath the control arm
    • Tighten the 24mm nut to 120-130 foot-pounds
    • Tighten the rear 21mm nut to 95-105 foot-pounds
  6. We recommend getting an alignment after this repair

  7. step : Reattaching the Wheel (11:03)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 8mm Socket

  • Wrenches - Metric

  • 24mm Wrench
  • 21mm wrench
  • 8mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2008-2017Buick Enclave Buick Enclave Front Passenger Side Control Arm with Ball Joint
2009-2017Chevrolet Traverse Chevrolet Traverse Front Passenger Side Control Arm with Ball Joint
2007-2016GMC Acadia GMC Acadia Front Passenger Side Control Arm with Ball Joint
2017GMC Acadia Limited GMC Acadia Limited Front Passenger Side Control Arm with Ball Joint
2007-2010Saturn Outlook Saturn Outlook Front Passenger Side Control Arm with Ball Joint

Part Interchange

Brand Label Part Number
ACDelco 45D1906
CARQUEST CA1362B
Centric Parts 622.66031
DIY Solutions SUS05921
Dorman 522-040
Dorman - OE Solutions 522-040
Dorman OE Solutions 522-040
General Motors 25798011
General Motors 20774419
General Motors OEM 25798011
General Motors OEM 20774419
Ingalls Engineering CAK621231
MAS Industries CB90424
MAS Industries CB90424PR
MOOG RK621231
MOOG Chassis Products RK621231
Mcquay-Norris FA3555
Mevotech GS501017
Mevotech MS501017
Mevotech CMS501017
NAPA 2606566
NAPA Premium 2606566
Precision Driveline CB50159
Raybestos Chassis 507-1979
SYD 1503042

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA84289
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Control arm and ball joint for saturn outlook
I was very pleased the package arrived at my house in 2 days. I was very surprised also the price was cheaper then at auto parts. Good quality will purshase other items from here in future.
January 26, 2017
Control arm review
I purchased a couple of control arms for my wifes 2009 buick enclave one arrived fine but i dont know what happened to the other one,all i recieved was an empty box with the control arm paper work so i called the 1A Auto and they sent me a replacement right away overall it was a great experience i do recommend other people to give them a try.
May 4, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Buick Saturn Front Passenger Side Control Arm with Ball Joint TRQ-1ASLF00693 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.