1AACV00171-Chevrolet GMC Buick Saturn Front Driver Side CV Axle Shaft

Replaces

Chevrolet GMC Buick Saturn Front Driver Side CV Axle Shaft TRQ CSA82140

1AACV00171

Part Details

This part replaces:

  • A1 Cardone 66-1465
  • OE # 15116786
FREE SAME DAY SHIPPING
Save 36%
List: $116.95 Save: $42.00
Part 1AACV00171
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: CSA82140

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

100% New Components

For quality fit, finish, and easy installation.

Heat Treated

For longer-lasting life and consistent performance under different road conditions.

Precision Machined

And made of brand new components, held to tighter tolerances for better consistency than rebuilt parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (0:45)
    • Remove the center cap
    • Reinstall the wheel
    • Tighten the lug nuts by hand
    • Lower the vehicle to the ground
    • Loosen the axle nut with a 34mm socket and breaker bar
    • Raise and secure the vehicle on jack stands
    • Remove the wheel
    • Tap on the end of the cv axle with the nut flush with the shaft
  3. step : Removing the Brake Caliper and ABS Sensor (3:22)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Remove the 10mm bolt from the ABS sensor
    • Remove the ABS sensor from the knuckle
  4. step : Removing the CV Axle (4:49)
    • Remove the lower strut bolts with 24mm socket and breaker bar, counterholding with a 21mm wrench
    • Tap the end of the axle with a hammer to release it
    • Remove the nut
    • Slide the axle out of the knuckle
    • Have a drain pan ready
    • Pry the axle out of the transmission
  5. step : Installing the CV Axle (9:34)
    • Insert the CV axle into the transmission until it hits the lock ring
    • Tap the CV axle into place with a dead blow hammer until it's locked in
    • Clean off any leaks from the transmission case with brake parts cleaner
    • Insert the CV axle into the knuckle
    • Thread the axle nut on by hand
    • Insert the lower strut bolts into the knuckle
    • Tighten the strut bolts with a 24mm socket and ratchet and a 21mm wrench
    • Torque the nuts to 144 foot-pounds
  6. step : Installing the Brake Caliper and ABS Sensor (12:35)
    • Insert the ABS sensor into place
    • Tighten the 10mm bolt to the sensor
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 42 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  7. step : Reattaching the Wheel (14:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a crossing or star pattern
    • Tighten the hub nut to 173 foot-pounds
    • Press on the center cap
  8. step : Testing the Transmission Fluid Level (15:25)
    • In a well ventilated area, start and run the vehicle to operating temperature
    • Turn the transmission fill/dipstick counterclockwise
    • Wipe off the dipstick
    • Insert the dipstick into place
    • Measure the fluid level
    • If needed, insert a funnel into place
    • Add the appropriate amount and type of transmission fluid
    • Check the amount with the dipstick
    • Tighten the cap

Tools needed for replacement:

    General Tools

  • Funnel
  • Hammer
  • Jack Stands
  • Rubber Mallet
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • Bungee Cord
  • Transmission Fluid

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 24mm Socket
  • 34mm Socket
  • 10mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 24mm Wrench


Fits the following Makes:

Year Make Model Description
2008-2017Buick Enclave Buick Enclave Front Driver Side CV Axle Shaft
2009-2017Chevrolet Traverse Chevrolet Traverse Front Driver Side CV Axle Shaft
2007-2017GMC Acadia GMC Acadia Front Driver Side CV Axle Shaft
2017GMC Acadia Limited GMC Acadia Limited Front Driver Side CV Axle Shaft
2007-2010Saturn Outlook Saturn Outlook Front Driver Side CV Axle Shaft

Part Interchange

Brand Label Part Number
Cardone New 66-1465
Cardone Select 66-1465
Chevrolet 25822834
Chevrolet 22796413
GSP NCV10638
General Motors 15116786
General Motors OEM 15116786
Saturn 15116786

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: CSA82140
Product Reviews
5.00/ 5.0 2
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Good Product!
December 14, 2018
The product is as described. The installation was as expected and did not take much time or effort. Will be buying one for my passenger side soon.
CV Axle Shaft
July 25, 2019
I bought the CV axle on 1A Auto and received it very quickly, It went in with ease and was very good quality , There is no way I could have done it as easy as I did without the video these guys know there stuff and I am so happy that I found 1A Auto online !! thank you for doing the help videos I have watched several and makes the job a breeze !
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet GMC Buick Saturn Front Driver Side CV Axle Shaft TRQ CSA82140-1AACV00171 does not fit your:




Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.


Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.


USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.


Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.