1ASLF00705-Chevrolet Camaro Front Passenger Side Control Arm with Ball Joint

Replaces

Chevrolet Camaro Front Passenger Side Control Arm with Ball Joint TRQ

1ASLF00705

This part replaces:

  • Dorman 522-064
  • Hollander 512-00615R
  • Moog K621480
  • OE # 20951301
  • Moog RK621480
  • Mevotech CMS501130
  • TRQ PSA84299
FREE SAME DAY SHIPPING
Save 18%
List: $78.95 Save: $14.00
Part 1ASLF00705
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA84299

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Fits RH (Passenger Side) Front Lower Rearward
  • Includes ball joint & bushings
  • Direct replacement
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:50)
    • Loosen the five 22mm lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:22)
    • Remove the 21mm nut that holds the ball joint to the wheel spindle
    • Hold the ball joint stud with a 10mm wrench if necessary
    • Strike the spindle with a hammer to loosen the ball joint stud
    • Hold the bolt that attaches the control arm to the frame with a 21mm wrench
    • Remove the 21mm nut from the control arm
  3. step : Installing the Control Arm (4:21)
    • Line up the control arm
    • Slide the ball joint stud into the wheel spindle
    • Thread the 21mm nut onto the ball joint by hand
    • Line up the frame side of the control arm
    • Slide the 21mm bolt into the frame side of the control arm
    • Thread the 21mm nut onto the 21mm bolt by hand
    • Hold the ball joint stud with a 10mm wrench if necessary
    • Tighten the 21mm nut onto the ball joint stud
    • Tighten the ball joint nut to 30 foot-pounds of torque
    • Tighten the ball joint nut an additional 90 degrees
    • Support the wheel spindle with a jack
    • Tighten the 21mm nut on the frame end of the control arm
    • Tighten the 21mm nut to 37 foot-pounds
    • Tighten the nut an additional 120 degrees
    • Remove the jack from the spindle
  4. step : Installing the Wheel (6:49)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lowr the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 21mm wrench
  • 10mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2010-2013Chevrolet Camaro Chevrolet Camaro Front Passenger Side Lower Rearward Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro LT Front Passenger Side Lower Rearward Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro SS Front Passenger Side Lower Rearward Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro LS Front Passenger Side Lower Rearward Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro ZL1 Front Passenger Side Lower Rearward Control Arm with Ball Joint

Part Interchange

Brand Label Part Number
ACDelco 45D1938
DIY Solutions SUS05933
Dorman 522-064
Dorman - OE Solutions 522-064
Dorman OE Solutions 522-064
General Motors 20951301
General Motors 20951301RH
General Motors 92195442
General Motors OEM 92195442
General Motors OEM 20951301
General Motors OEM 20951301RH
MAS Industries CB91284PR
MAS Industries CB91284
MAS Industries IA14029
MOOG RK621480
MOOG Chassis Products RK621480
Mcquay-Norris FA3612
Mevotech GS501130
Mevotech CMS501130
Mevotech MS501130
NAPA 2606612
NAPA Premium 2606612
Precision Driveline CB50316
SYD 1503056

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA84299
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Camaro Front Passenger Side Control Arm with Ball Joint TRQ-1ASLF00705 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.