1ASLF00702-Chevrolet Camaro Front Driver Side Control Arm with Ball Joint

Replaces

Chevrolet Camaro Front Driver Side Control Arm with Ball Joint TRQ

1ASLF00702

This part replaces:

  • Dorman 522-061
  • Hollander 512-00614L
  • Moog K621479
  • OE # 92236899
  • Moog RK621479
  • Mevotech CMS501127
  • TRQ PSA84296
FREE SAME DAY SHIPPING
Save 20%
List: $99.95 Save: $20.00
Part 1ASLF00702
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA84296

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Specifications:

  • Fits LH (Driver Side) Front Lower Forward
  • Includes ball joint & bushings
  • Direct replacement
  • Built to strict quality control standards

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:50)
    • Loosen the five 22mm lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (1:22)
    • Loosen the 21mm nut that holds the ball joint to the wheel spindle
    • Leave the nut flush with the end of the ball joint stud
    • Strike the wheel spindle with a hammer to loosen the ball joint stud
    • Remove the ball joint nut
    • Hold the 21mm nut at the frame end of the control arm with a wrench
    • Remove the 21mm nut and bolt at the frame end of the control arm
  3. step : Installing the Control Arm (4:03)
    • Line up the control arm
    • Insert the bolt through the frame end of the control arm
    • Insert the ball joint stud into the wheel spindle
    • Start the 21mm nut onto the ball joint stud
    • Hold ball joint stud with a 10mm wrench
    • Tighten the ball joint nut with a 21mm nut
    • Tighten the ball joint nut to 30 foot-pounds of torque
    • Tighten the ball joint nut an additional 90 degrees
    • Start the 21mm nut at the frame end of the control arm
    • Raise the suspension with a jack
    • Hold the 21mm nut with a wrench
    • Tighten the 21mm bolt to 37 foot-pounds
    • Tighten the 21mm bolt an additional 120 degrees
    • Remove the jack from the suspension
  4. step : Installing the Wheel (7:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Lowr the vehicle to the ground
    • Tighten the lug nuts to 140 foot-pounds in a star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 21mm wrench
  • 10mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2010-2013Chevrolet Camaro Chevrolet Camaro Front Driver Side Forward Lower Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro LT Front Driver Side Forward Lower Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro SS Front Driver Side Forward Lower Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro LS Front Driver Side Forward Lower Control Arm with Ball Joint
2014-2015Chevrolet Camaro Chevrolet Camaro ZL1 Front Driver Side Forward Lower Control Arm with Ball Joint

Part Interchange

Brand Label Part Number
ACDelco 45D1937
DIY Solutions SUS05930
Dorman 522-061
Dorman - OE Solutions 522-061
Dorman OE Solutions 522-061
General Motors 92195444
General Motors 92236899LH
General Motors 92236899
General Motors OEM 92195444
General Motors OEM 92236899
General Motors OEM 92236899LH
MAS Industries CB90113
MAS Industries CB90113PR
MOOG RK621479
MOOG Chassis Products RK621479
Mcquay-Norris FA3611
Mevotech GS501127
Mevotech CMS501127
Mevotech MS501127
NAPA 2606611
NAPA Premium 2606611
Precision Driveline CB50348
SYD 1503053

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA84296
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect part
Great product , worked exactly how it should and went on with ease definitely a good purchase
October 22, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Camaro Front Driver Side Control Arm with Ball Joint TRQ-1ASLF00702 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.