1ASFK00163-Chevrolet Buick Pontiac Olds Rear Trailing Arm Pair


1990 Buick Regal Rear Trailing Arm Pair

Guaranteed to fit: 1990 Buick Regal

Fit Details

  • Front or Rear Location: Rear

Part Details

  • Quantity: Pair

This part replaces:

  • Dorman 905-501
  • Hollander 513-00115
  • Moog K6402
  • OE # 15820927
  • DIY Solutions SUS00675
Save 25%
List: $68.95 Save: $17.00
Only 10 left in stock
Part 1ASFK00163
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SUS00675

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   Pair

These replacement rear trailing arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Includes new bushings
  • Trailing arms are new, not remanufactured or refurbished

Worn trailing arm bushings can cause excessive tire wear, popping or creaking in the rear suspension, and pose a serious safety concern. Replace those bent, rusted, rotted, or damaged rear trailing arms with our high quality replacements.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Raise and secure the vehicle (1:16)
    • Jack your car up and place jack stands and the pinch weld lift points or on the brace next to the pinch weld.
  2. step : Remove the old control arm (1:45)
    • Coat the bolts on either end of the control arm with penetrating oil.
    • Remove your wheel.
    • Use a socket and wrench with a breaker bar to remove the bolts.
    • Put the breaker bar on the nut and secure the bolt with the other socket and ratchet or wrench.
    • Remove the control arm.
  3. step : Install the new control arm (7:00)
    • Put the new control arm into place and thread the bolt in, the top of the bolt on the inside of the car pointing outward.
    • Apply some anti-seize grease to the ends of the bolts to help out whoever works on the car next.
    • Jack up your control arm to put your suspension in the correct position before torqueing.
    • Torque the control arm bolts to 80 ft lbs.
    • Put the wheel back on, lower the car and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 18mm Socket
  • 24mm Socket

  • Wrenches - Metric

  • 19mm Wrench
  • 18mm Wrench
  • 24mm Wrench
  • 15mm Wrench

Fits the following Makes:

Year Make Model Description
2005-2007Buick Allure Buick Allure Rear Trailing Arm Pair
2008-2009Buick Allure Buick Allure with RPO Code FE1 (Soft Ride Suspension) Rear Trailing Arm Pair
1997-2005Buick Century Buick Century Rear Trailing Arm Pair
2005-2007Buick LaCrosse Buick LaCrosse Rear Trailing Arm Pair
2008-2009Buick LaCrosse Buick LaCrosse with RPO Code FE1 (Soft Ride Suspension) Rear Trailing Arm Pair
1988-2004Buick Regal Buick Regal Rear Trailing Arm Pair
2000-2005Chevrolet Impala Chevrolet Impala (without Police Package) Rear Trailing Arm Pair
2006-2010Chevrolet Impala Chevrolet Impala with RPO Code FE1 (Soft Ride Suspension) Rear Trailing Arm Pair
2011-2013Chevrolet Impala Chevrolet Impala Rear Trailing Arm Pair
2014-2016Chevrolet Impala Limited Chevrolet Impala Limited Rear Trailing Arm Pair
1990-1995Chevrolet Lumina Chevrolet Lumina Rear Trailing Arm Pair
1996-2001Chevrolet Lumina Chevrolet Lumina with RPO Code FE1 (Soft Ride Suspension) Rear Trailing Arm Pair
1995-2007Chevrolet Monte Carlo Chevrolet Monte Carlo without Heavy Duty Suspension Rear Trailing Arm Pair
1988-1996Oldsmobile Cutlass Olds Cutlass Rear Trailing Arm Pair
1988-1997Oldsmobile Cutlass Supreme Olds Cutlass Supreme Rear Trailing Arm Pair
1998-2002Oldsmobile Intrigue Olds Intrigue Rear Trailing Arm Pair
1988-2004Pontiac Grand Prix Pontiac Grand Prix Rear Trailing Arm Pair
2005-2008Pontiac Grand Prix Pontiac Grand Prix without Heavy Duty Suspension Rear Trailing Arm Pair

Part Interchange

Brand Label Part Number
DIY Solutions SUS00675
DIY Solutions SUS06451
Dorman - OE Solutions 905-501
Dorman OE Solutions 905-501
General Motors 15820927
MOOG Chassis Products RK6402

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

DIY Solutions
Brand #: SUS00675
Product Reviews
5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I had no problem ?? ordering my parts. They have fit good. Thank you. Chris .
December 20, 2017
Great product
Fit like a. Glove delivery was good product was made solid 1 a auto was easy to use and good videos to look at
March 10, 2018
Better than factory original
These trailing arms are more solid compared to the original pieces. The factory trailing arms are stamped steel brackets. The A1 replacement is a solid bar design, much stronger.
December 9, 2018
Better than oem
Exact fit better than original super price easy to install definitely recommend
October 21, 2019
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Buick is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Buick or General Motors Company. See all trademarks.

Chevrolet Buick Pontiac Olds Rear Trailing Arm Pair DIY Solutions-1ASFK00163 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 1990 Buick Regal with these options.