1ASSL00360-Chevrolet Buick Pontiac Olds Rear Sway Bar Kit

Replaces

Chevrolet Buick Pontiac Olds Rear Sway Bar Kit Dorman 927-110

1ASSL00360

This part replaces:

  • Dorman 927-110
  • Hollander 524-00301
  • Hollander 524-00561
  • Hollander 524-00301, 524-00561
  • OE # 10243923
  • OE # 10274736
FREE SAME DAY SHIPPING
Save 33%
List: $194.95 Save: $65.00
Only 3 left in stock
Part 1ASSL00360
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Dorman
Brand #: 927-110

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • REAR Sway Bar with Install Kit
  • Includes brackets, bushing, end links, & hardware
  • Replaces dealer part numbers: 10243923, 10274736
  • Direct replacement
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Epichlorohydrin, which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:38)
    • Remove the lug nut caps with a 19mm socket
    • Pull off the hub cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:05)
    • Hold the upper sway bar link stud with a 14mm inch wrench
    • Remove the upper nut from the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 14mm inch wrench
    • Remove the lower nut from the sway bar link with an 18mm socket and ratchet
    • Pull off the sway bar link
    • Remove the other sway bar link following these same steps
  3. step : Removing the Sway Bar (1:35)
    • Apply penetrating oil to the sway bar mount bolts
    • Remove the 15mm bolt from each sway bar mount
    • Lift the sway bar mount up and off
    • Slide the sway bar back and out
  4. step : Installing the New Sway Bar (2:26)
    • Put the new sway bar into place
    • Clip the sway bar mounts onto the sway bar
    • Put the sway bar links into place
    • Thread the nuts onto the sway bar links by hand
    • Push the sway bar into its mounts
    • Start the 15mm bolts into each sway bar mount by hand
    • Hold the upper sway bar link stud with a 14mm inch wrench
    • Fasten the upper nut onto the sway bar link with an 18mm socket and ratchet
    • Hold the lower sway bar link stud with a 14mm inch wrench
    • Fasten the lower nut onto the sway bar link with an 18mm socket and ratchet
    • Lower the vehicle onto jack stands so the suspension sits at ride height
    • Tighten the 15mm bolt into each sway bar mount
  5. step : Reattaching the Wheel (4:23)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the hub cap
    • Install the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 18mm Socket
  • 19mm Socket
  • 15mm Socket

  • Wrenches - Metric

  • 14mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2005-2009Buick Allure Buick Allure with RPO Code FE1 (Soft Ride Suspension) Rear Sway Bar Kit
1997-2005Buick Century Buick Century Rear Sway Bar Kit
2005-2009Buick LaCrosse Buick LaCrosse with RPO Code FE1 (Soft Ride Suspension) Rear Sway Bar Kit
1997-2004Buick Regal Buick Regal Rear Sway Bar Kit
2000-2011Chevrolet Impala Chevrolet Impala with RPO Code FE1 (Soft Ride Suspension) Rear Sway Bar Kit
2000-2011Chevrolet Impala Chevrolet Impala with RPO Code FE2 (Ride Handling Suspension) Rear Sway Bar Kit
2000-2007Chevrolet Monte Carlo Chevrolet Monte Carlo Rear Sway Bar Kit
1998-2002Oldsmobile Intrigue Olds Intrigue Rear Sway Bar Kit
1997-2003Pontiac Grand Prix Pontiac Grand Prix Rear Sway Bar Kit
2004-2008Pontiac Grand Prix Pontiac Grand Prix with RPO Code FE2 (Ride Handling Suspension) Rear Sway Bar Kit
2007-2008Pontiac Grand Prix Pontiac Grand Prix with RPO Code FE1 (Soft Ride Suspension) Rear Sway Bar Kit

Part Interchange

Brand Label Part Number
DIY Solutions SUS06871

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
Dorman
Brand #: 927-110
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Buick Pontiac Olds Rear Sway Bar Kit Dorman 927-110-1ASSL00360 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.