1ABPS03019-Chevrolet Buick Pontiac Olds Front Semi-Metallic Brake Pads

Replaces

Chevrolet Buick Pontiac Olds Front Semi-Metallic Brake Pads TRQ

1ABPS03019
FREE SAME DAY SHIPPING
Part 1ABPS03019
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BFA73565

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Positive Mold Technology

  • Improves durability and performance by allowing for even wear.
  • Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting, better performing brake pad.
OE Grade Multi-Layer Shim - Reduces noise and vibration
Environmentally Compliant - Meets the Better Brake Law standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nut caps with a 19mm socket
    • Pull off the center cap by hand
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:13)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:40)
    • Loosen the two 3/8 inch Allen bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver or a pry bar to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads out of the caliper with a flat blade screwdriver
  4. step : Removing the Brake Rotor (3:05)
    • Slide off the rotor
    • If the rotor won't come off normally strike it with a hammer to loosen it
  5. step : Preparing the Brake Caliper (3:07)
    • Use a large C-clamp to push the pistons back into the caliper
    • Remove the two 3/8 inch Allen bolts from the brake caliper
    • Clean the caliper bolts with a wire brush
    • Apply white grease to the bolts
    • Slide the bolts into the caliper
  6. step : Installing the New Brake Rotor (4:10)
    • Slide on the new brake rotor
  7. step : Installing the New Brake Pads (4:17)
    • Apply white grease to the brake pads
    • Snap the brake pads into the caliper
    • Put the caliper on
    • Tighten the two 3/8 inch Allen bolts to between 30 - 35 foot-pounds of torque
  8. step : Reattaching the Wheel (5:34)
    • Turn the wheel straight
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with 19mm socket
  9. step : Testing the Brakes (6:01)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Wire Brush
  • Jack Stands
  • Large C-Clamp

  • Hex Wrenches

  • 3/8 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 19mm Socket


Fits the following Makes:

Year Make Model Description
1996-1997Buick Skylark Buick Skylark Front Semi-Metallic Brake Pads
1996Chevrolet Beretta Chevrolet Beretta Front Semi-Metallic Brake Pads
1996-2005Chevrolet Cavalier Chevrolet Cavalier Front Semi-Metallic Brake Pads
1996Chevrolet Corsica Chevrolet Corsica Front Semi-Metallic Brake Pads
1996-1998Oldsmobile Achieva Olds Achieva Front Semi-Metallic Brake Pads
1996-1998Pontiac Grand Am Pontiac Grand Am Front Semi-Metallic Brake Pads
1996-2005Pontiac Sunfire Pontiac Sunfire Front Semi-Metallic Brake Pads

Part Interchange

Brand Label Part Number
Auto Extra AXMD673
Buick 18024932
Buick 12510050
Chevrolet 12510050
FMSI MD673

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BFA73565
Product Reviews
There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Buick Pontiac Olds Front Semi-Metallic Brake Pads TRQ-1ABPS03019 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.