Kit Includes: (2) Front Sway Bar Links (2) Rear Sway Bar Links (2) Front Lower Control Arms with Ball Joints (2) Front Outer Tie Rods (2) Front Inner Tie Rods (2) Front Wheel Bearing & Hub Assemblies (2) Front Steering Rack & Pinion Bellows
Specification
Vehicle Brake Option
with ABS Brakes
Location
Front & Rear
Product Features
100% New: Manufactured to tighter tolerances for extended service life
Upgraded Elastomer: Premium seals to extended service life
Moly Greased: Specifically-designed grease shield to reduce premature wear
Restored Performance: Refreshed steering system for improved road-feel
TRQ drivetrain kits are manufactured using premium raw materials to restore original performance. Each TRQ drivetrain component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the service life of your drivetrain, TRQ recommends replacing wheel hubs, bearings, and constant velocity (CV) drive axles at the same time to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How To Replace Front Wheel Bearing Hub 2006-2011 Cadillac DTS
How to Replace Wheel Bearing and Hub Assembly 2006-2013 Chevrolet Impala
How to Replace Sway Bar Link 2006-2013 Chevrolet Impala
How to Replace Outer Tie Rod 2006-2013 Chevrolet Impala
How to Replace Front Wheel Bearing 2000-2005 Buick LeSabre
How to Replace Sway Bar Link 2006-2013 Chevy Impala
How to Replace Bellows Boot 2007-2009 Saturn Aura
How to Replace Control Arm With Ball joint 2006-2013 Chevrolet Impala
How to Replace Inner Tie Rod 2006-2013 Chevrolet Impala
How to Replace Sway Bar Link 2006-2013 Chevrolet Impala
How to Replace Front Sway Bar Link 2000-07 Chevy Monte Carlo
How to Replace Rear Sway Bar Link 2006-2013 Chevrolet Impala
Brake Caliper Compressor Tool. Single Piston. Lever Style.
sanding disc
10mm Socket
T30 Socket
Cloth Rags
3/8 Inch Impact Gun
Tools used
14mm Wrench
Torque Wrench
Socket Extensions
16mm Wrench
15mm Socket
16mm Socket
18mm Socket
19mm Socket
Drill
Swivel
Tools used
Torque Wrench
Hammer
Socket Extensions
18mm Wrench
18mm Socket
19mm Socket
Liquid Thread Locker
Pliers
Gloves
Socket Driver
Center Punch
22mm Wrench
10mm Socket
Tools used
13mm Socket
Torque Wrench
Hammer
Socket Extensions
Rust Penetrant
15mm Socket
Pry Bar
Jack Stands
19mm Socket
Liquid Thread Locker
Brake Parts Cleaner
Pocket Screwdriver
Brake Caliper Hanger
34mm Socket
Copper Anti-Seize
Center Punch
Brake Grease
Ratchet
Floor Jack
Wire Brush
Needle nose pliers
Tools used
14mm Wrench
13mm Socket
Torque Wrench
Hammer
19mm Socket
Ratchet
13mm Wrench
Tools used
21mm Socket
21mm wrench
Torque Wrench
Hammer
Pry Bar
18mm Socket
19mm Socket
Anti-Seize Grease
Pliers
1/2 Inch Impact Gun
Tools used
13mm Socket
Torque Wrench
18mm Wrench
Pry Bar
7mm Wrench
19mm Socket
Grease Gun
Trim Tool Set
Pliers
21mm Socket
Ratchet Strap
Dead Blow Hammer
Phillips Head Screwdriver
Ratchet
13mm Wrench
Tools used
Torque Wrench
Hammer
Socket Extensions
18mm Wrench
18mm Socket
19mm Socket
Liquid Thread Locker
Pliers
Gloves
Inner Tie Rod Removal Tool
Socket Driver
Paper Towels
Center Punch
22mm Wrench
10mm Socket
Ratchet
Cloth Rags
Tools used
14mm Wrench
Torque Wrench
Socket Extensions
16mm Wrench
15mm Socket
16mm Socket
18mm Socket
19mm Socket
Drill
Swivel
Tools used
14mm Wrench
13mm Socket
Torque Wrench
14mm Socket
Jack Stands
19mm Socket
Ratchet
Floor Jack
1. Removing the Wheel
Loosen the lug nut covers with a 19mm socket
Pry off the center cap with a flat blade screwdriver
Loosen the lug nuts with the vehicle on the ground
Raise the vehicle with a floor jack
Secure the vehicle on jack stands
Remove the lug nuts
Pull off the wheel
Repeat the process for the other side
2. Removing the Sway Bar Link
Spray the top of the stabilizer link with penetrating oil
Place a 14mm wrench to hold the top
Place a 14mm socket on the bottom
Turn the 14mm socket to loosen the sway bar link
Remove the top bushings
Remove the sway bar link
3. Installing the New Sway Bar Link
Insert the new sway bar and angle it forward
Place the bushing into the sway bar link
Place the sway bar onto the sway bar link
Place the nut on top of the bushing by hand
Repeat the process for the other side
Place the weight of the vehicle on the jack stands
Tighten up the sway bar links with a 14mm ratchet
Tighten up each of the 15mm mounts on the sway bar
4. Reattaching the Wheel
Slide the wheel into place
Start the lug nuts by hand
Tighten the lug nuts preliminarily
Lower the vehicle to the ground
Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
Reattach the center cap
Tighten the lug nut covers with a 19mm socket
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a front sway bar link on this 2003 Chevy Monte Carlo. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need include a new front sway bar link from 1AAuto.com, 13mm, 14mm and 19mm socket, a ratchet, a 14mm wrench, and jack and jack stands.
Start off by just loosening up these lug nut caps. Now you can remove your lug nuts. If you don't have air-powered tools you want to loosen these up while the vehicle's on the ground. Then raise the vehicle and remove them the rest of the way. If you do have air-powered tools, you can just remove them right here. For this repair it's important to note you have to have both wheels off the ground. You can't just jack one wheel up. It'll make this repair difficult.
Spray down the top of the link with some penetrating oil. Then use a 14mm wrench to hold the top, and a 14mm socket and ratchet on the bottom. Now, this actually comes apart easily. It's not uncommon, but sometimes the link is totally broken and you don't even have to do this step. You just pull the remains out. Also, sometimes they're frozen up so bad you have to use a saw or a torch to cut the links out. Pull the top bushings off and push the sway bar link down and out, and then remove the bushings in the center.
Take your sway bar link and put the center bushings in first. Then run your sway bar link up through the bushings. Then replace the top bushing, the washer, and the nut. Just twist that nut on. Once you have it on there securely, you want to lower your vehicle down onto the jack stands so that all the pressure is on the suspension. Then tighten up the sway bar the rest of the way.
Then replace your wheel and each of the lug nuts. You want to just tighten them preliminary, and then lower the vehicle and tighten them the rest of the way. Now torque each of these to a hundred foot-pounds in a crossing pattern. Then replace your hubcap and tighten up the lug nut caps.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
14mm Wrench
Torque Wrench
Socket Extensions
16mm Wrench
15mm Socket
16mm Socket
18mm Socket
19mm Socket
Drill
Swivel
PSA66563
In Stock
Product Reviews
Loading reviews
5.00/ 5.06
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Everything i needed
B
October 13, 2020
Best place to get all of your parts as a set. I am loving my new suspension kit, I got everything in one package so there was no need to order any parts with this kit set.
Satisfied customer
Sheila
December 6, 2020
100 percent satisfied with the parts that I received and the customer service department for making my order right after I called because i was missing an item. We are all human and make mistakes but thankful for the speedy correction and timely manner that your company replied and fixed the issue. W outdoor recommended you to friends and family.
Great product and great shipping
L
January 4, 2021
Got my parts in no time, they were well packed and of high quality. Got my headlights shortly after and couldn't be happier
Great kit!!!
M
February 28, 2021
Everything fit perfect! Along with the kit i replaced the strut complete assembly on both sides and cv joints. Spens about 2 hours for each side but everything went in like butter! Watch the videos it will make your life so much easier!
Thanks A1 !
Robert
July 31, 2021
My first order from A1. Arrived in 3 days. Parts matched up and installed perfectly.
And the best part, I saved a lot of money !
It doesn't get better than this.
Jeffrey
November 8, 2021
Good kit working great
Customer Q&A
Has the product worked well and lasted for you guys?, I am thinking about going with 1AAuto.February 12, 2021
Hunter H
10
DIY solutions brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. The parts will also carry a lifetime warranty on them against manufacturing defects.
February 12, 2021
Emma F
Will it fit a gxp?August 20, 2021
Tamara B
10
Hello, I apologize we would need the full vehicle information to verify the fit for you.
August 20, 2021
Ricale A
Will this kit fit a 08 impala ss ?September 11, 2021
Pierre O
10
This is listed to fit a 2006-2008 Chevrolet Impala with ABS Brakes without RPO Code FE4 (Special Ride & Handling Suspension)
September 11, 2021
Cristina P
Will this kit for a 2011 chev impala LS?September 12, 2021
Jason H
10
Yes, this part will fit your vehicle as long as your vehicle is without RPO Code FE4.
September 13, 2021
Emma F
Will this work on my 2013 chevy impala police?November 2, 2021
Jesse P
10
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
November 2, 2021
T I
what is RPO, and how do I find out if my car has it or not?December 30, 2021
John D
10
An RPO Code is a regular production option. We would be happy to check. Can you please provide the VIN?
December 30, 2021
Andra M
Would this fit my 2007 Pontiac Grand Prix (Base)?June 9, 2022
Lakeysha B
10
This will fit a 2007 Pontiac Grand Prix with 34mm Diameter Sway Bar with ABS Brakes
June 9, 2022
Cristina P
I know it says impala 2012 but is it compatible with an ltz that comes with fe3 sport suspension?November 15, 2022
Christopher M
10
This part will not fit your vehicle, but we may have a part that is listed to fit.
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
November 15, 2022
Ricale A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.