1ABFS00438-Chevrolet Buick Front Semi-Metallic Brake Pad & Rotor Kit

Replaces

Chevrolet Buick Front Semi-Metallic Brake Pad & Rotor Kit

1ABFS00438

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: Brake Pad Contact Point Grease
  • Kit Includes: Brake Pad Hardware
FREE SAME DAY SHIPPING
Save 30%
List: $135.95 Save: $41.00
Part 1ABFS00438
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BKA10674

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Brake Pad Bonding Type:   Premium Posi
  • Brake Pad Friction Material:   Semi-Metallic
  • Kit Includes:
      (1) Front Semi-Metallic Brake Pad Set
      (2) Front Replacement Brake Rotors
      Brake Pad Contact Point Grease
      Brake Pad Hardware

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:39)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:15)
    • Remove the two 13mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a pry bar to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
    • Remove the brake pad slides
  4. step : Removing the Brake Rotor (2:24)
    • Remove the two 15mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (2:58)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the caliper slides
    • Apply grease to the brake pad tabs
    • Clean the brake pad slides with a wire brush
  6. step : Installing the New Brake Rotor (3:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the two 15mm bolts by hand
    • Tighten the 15mm bolts to 75 foot-pounds of torque
  7. step : Installing the New Brake Pads (4:21)
    • Push the brake pad slides into place
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 13mm bolts by hand
    • Tighten the 13mm bolts to 30 foot-pounds
  8. step : Reattaching the Wheel (5:43)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Fasten on the lug nut covers with a 19mm socket
  9. step : Testing the Brakes (6:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Wire Brush
  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Brake Parts Cleaner

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 13mm Socket
  • 15mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2006-2008Buick Lucerne Buick Lucerne V6 3.8L Front Semi-Metallic Brake Pad & Rotor Kit
2009-2011Buick Lucerne Buick Lucerne V6 3.9L Front Semi-Metallic Brake Pad & Rotor Kit
2006-2011Chevrolet Impala Chevrolet Impala Front Semi-Metallic Brake Pad & Rotor Kit
2012-2013Chevrolet Impala Chevrolet Impala (without Police & Taxi Package) Front Semi-Metallic Brake Pad & Rotor Kit
2006-2007Chevrolet Monte Carlo Chevrolet Monte Carlo Front Semi-Metallic Brake Pad & Rotor Kit

Part Interchange

Brand Label Part Number
Aimco 55126
Bendix PRT5654
DIY Solutions BFS00322
DuraGo BR55126
Raybestos EHT1159H
Raybestos Brakes EHT1159H
Raybestos Brakes 580403
Wagner BD126347

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BKA10674
Product Reviews
5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
The parts came fast through the mail and very easy to put on
February 26, 2019
Brake kit
The brake pads and brake rotors fit great, and work as they should
May 3, 2019
Front brakes / rotor kit
Brake / Rotor kit was easy to order and received it in short amount of time. Order was complete with all of the parts. Parts were the parts needed for the car that they were ordered for. I will be ordering more parts like this from 1A Auto in the future for my vehicles.
June 22, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Chevrolet Buick Front Semi-Metallic Brake Pad & Rotor Kit-1ABFS00438 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.