1ASHS00909-Chevrolet Buick Cadillac Saab Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set

Replaces

2015 Buick LaCrosse Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set

1ASHS00909-1018720-2015
Guaranteed to fit: 2015 Buick LaCrosse

Fit Details

  • Front or Rear Location: Front & Rear

Part Details

  • Quantity: 4 Piece Set
  • Wheel Bearing & Hub Assembly Features & Benefits: Direct Fit Replacement
  • Wheel Bearing & Hub Assembly Features & Benefits: Precision Engineered
  • Wheel Bearing & Hub Assembly Features & Benefits: Highest Quality Materials
  • Bearing Type: Ball Bearing

This part replaces:

  • Hollander 538-00223
  • TRQ BHA53775
  • OE # 13504972
  • OE # 13502886
FREE SAME DAY SHIPPING
Save 28%
List: $269.95 Save: $75.00
Part 1ASHS00909
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53775

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:25)
    • Pry out the center cap with a pick
    • Loosen the 35mm hub nut with a breaker bar
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Nut (1:37)
    • Spray rust penetrant in the hub nut
    • Loosen the 35mm nut
    • Thread the nut on a few threads
    • Tap the nut with a mallet to loosen the axle
  3. step : Removing the Brakes (2:37)
    • Loosen the 14mm caliper bolts
    • Secure the caliper with a bungee cord
    • Remove the 18mm caliper bracket bolts
    • Remove the caliper bracket and the pads
    • Remove the T30 Torx bolt from the rotor
    • Remove the rotor
  4. step : Removing the ABS Sensor (4:25)
    • Remove the 10mm bolt from the ABS sensor
    • Remove the ABS sensor
  5. step : Removing the Hub (4:50)
    • Remove the three 13mm bolts from the hub
    • Tap the hub out from the knuckle
    • Remove the hub from the axle
  6. step : Installing the New Hub (7:06)
    • Clean any corrosion from the axle splines with brake cleaner and a wire brush
    • Apply anti-seize grease around the knuckle cavity
    • Slide the hub over the axle
    • Tighten the three 13mm bolts to the hub
    • Torque the bolts to 74 foot-pounds
  7. step : Reinstalling the ABS Sensor (9:17)
    • Insert the ABS sensor into place
    • Tighten the 10mm bolt to the ABS sensor
  8. step : Reinstalling the Axle Nut (9:51)
    • Thread the axle nut on by hand
    • Tighten the 35mm axle nut
  9. step : Installing the Caliper Bracket and Rotor (10:15)
    • Insert the rotor to the hub
    • Tighten the T30 Torx bolt to the rotor
    • Put the caliper bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 140 foot-pounds of torque
  10. step : Installing the Brake Caliper (11:17)
    • Press the metal clip to the brake pad
    • Put an old pad in the caliper
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back if needed
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten the 14mm bolts to 20 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  11. step : Reattaching the Wheel (11:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 125 foot-pounds in a crossing or star pattern
    • Torque the hub nut to 151 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • Swivel
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • 14mm Socket
  • 18mm Socket
  • 10mm Socket

  • Star Drivers & Sockets

  • T30 Driver

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
do these wheel bearings have the wheel speed encoder rings embedded?
Tony R March 18, 2019
Yes, these parts are built to the same specs of the original equipment parts.
Andra M March 19, 2019
Do the wheel bearing assembly for the 2010 Buick lacrosse have the speed sensor built in??
Jeffery S November 11, 2019
These parts will not come with the speed sensor built into the assembly. Please let us know if you have any further questions.
Emma F November 11, 2019
Can these work with the abs?
Warrington M December 28, 2019
I believe they do but when I purchased these I had to return them for they are for the 2015 body trim. Not the new 2016 body trims. Just fyi
Romulo E December 28, 2019
Yes they have a magnetic ring on the back that picks up the signal from the sensor.
E K December 29, 2019
Ok thank you
Warrington M December 29, 2019
These will be able to work for vehicles with ABS due to the ABS tone ring. Please do not hesitate to contact us with any further questions.
Emma F December 29, 2019

Fits the following Makes:

Year Make Model Description
2010Buick Allure Buick Allure Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2010-2016Buick LaCrosse Buick LaCrosse Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2011-2017Buick Regal Buick Regal Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2013-2017Cadillac XTS Cadillac XTS without Heavy Duty Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2014-2017Chevrolet Impala Chevrolet Impala Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2013-2015Chevrolet Malibu Chevrolet Malibu Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2016Chevrolet Malibu Limited Chevrolet Malibu Limited Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set
2010-2011Saab 9-5 Saab 9-5 Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set

Part Interchange

Brand Label Part Number
ACDelco FW381
ACDelco FW380
Beck / Arnley 051-6402
Beck/Arnley 051-6402
Chicago Rawhide BR930777
General Motors 13502785
General Motors 13502886
General Motors 22859843
General Motors 7467839
General Motors 13504972
General Motors 13589507
General Motors OEM 13589507
General Motors OEM 13504972
General Motors OEM 13502886
General Motors OEM 22859843
General Motors OEM 13502785
General Motors OEM 7467839
MOOG Hub Assemblies 513288
SKF BR930777
Saab 13502785
Saab 13502886
Timken 513288
Timken HA590351

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: BHA53775
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Awesome
Awesome product and it arrived on time. Customer Service was great. I would recommend them to anyone.
August 13, 2018
Wrong part but great customer service
So when I first bout the part it said it was compatible, after taking one hub off my car I then realized it was not right. I called A1 and they asked for pictures from my old one and the new one. Responded within 36 hrs from contacting them and are now issuing a correction on their website and giving me a full refund..will go back to them in the future
March 22, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Buick is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Buick or General Motors Company. See all trademarks.

Chevrolet Buick Cadillac Saab Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ-1ASHS00909 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2015 Buick LaCrosse with these options.