1ASFK05911-Buick Rendezvous Pontiac Aztek Front Strut & Spring Assembly 4 Piece Set

Replaces

2004 Pontiac Aztek Front Strut & Spring Assembly 4 Piece Set

1ASFK05911-1163447-2004
Guaranteed to fit: 2004 Pontiac Aztek

Fit Details

  • Front or Rear Location: Front

Part Details

  • Quantity: 4 Piece Set
  • Includes: Sway Bar Links

This part replaces:

  • Monroe 172113
  • Monroe 182113
  • Hollander 527-01454
  • Moog K5342
  • OE # 89060180
  • OE # 22179331
  • OE # 22064790
  • OE # 89060183
  • OE # 15851956
FREE SAME DAY SHIPPING
Save 37%
List: $334.95 Save: $125.00
Part 1ASFK05911
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: SHO00481
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Includes:   Sway Bar Links
  • Quantity:   4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:40)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:13)
    • Turn the wheel by hand
    • Hold the nut at the top of the sway bar link with a 13mm wrench
    • Loosen the sway bar link bolt with a 13mm socket and ratchet
    • Apply penetrating oil to the bolt if necessary
    • Make note of the positions of the bushings and washers
    • Tap the bolt out with a hammer
  3. step : Installing the New Sway Bar Link (2:36)
    • Place a rubber bushing on the control arm
    • Put on a washer
    • Put on the metal sleeve
    • Lift the sway bar with a pry bar
    • Put a rubber bushing on top of the metal sleeve
    • Put a washer and a rubber bushing onto the bolt
    • Slide the bolt into place
    • Put a rubber bushing on the bolt, on top of the way bar
    • Put on a washer
    • Thread on the nut
    • Hold the nut at the top of the sway bar link with a 14mm wrench
    • Tighten the sway bar link bolt with a 14mm socket and ratchet
  4. step : Reattaching the Wheel (4:10)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap, lining up the notch with the valve stem
    • Tighten the lug nut covers with a 22mm socket

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 13mm Wrench
  • 14mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2007Buick Rendezvous Buick Rendezvous Front Strut & Spring Assembly 4 Piece Set
2001-2005Pontiac Aztek Pontiac Aztek Front Strut & Spring Assembly 4 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SHO00481
DIY Solutions SUS06178
General Motors 15851956
MOOG K5342
MOOG Chassis Products K5342
Monroe 172113
Monroe 182113
Monroe Shocks & Struts 182113
Monroe Shocks & Struts 172113
Unity Automotive 11320

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: SHO00481
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Front struts
The quality and the fast delivery was great one of the purchase I have made in long time keep up the great service
April 14, 2019
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Pontiac is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Pontiac or General Motors Company. See all trademarks.

Buick Rendezvous Pontiac Aztek Front Strut & Spring Assembly 4 Piece Set-1ASFK05911 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2004 Pontiac Aztek with these options.