This Rear brake pad set is just what you need to get your vehicle stopping in good order again!

Specifications:

  • Semi-Metallic brake pads
  • 4 Piece REAR brake pad set
  • Includes shims
  • Direct replacements

This brake pad set makes a great replacement and has an excellent value over the price of dealer brake pads.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quite braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:04)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:19)
    • Remove 14mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pry the brake pads off
    • Reset the caliper using a caliper reset tool
  3. step : Removing the Brake Rotor (3:20)
    • Remove the two 17mm bolts from the caliper bracket
    • Remove bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. step : Installing the New Brake Rotor (3:51)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to between 65 and 70 foot-pounds of torque
  5. step : Preparing the Caliper Slides (4:24)
    • Remove the caliper slide
    • Clean the caliper slide
    • Apply grease to the caliper slides
    • Replace the caliper slide
  6. step : Installing the New Brake Pads (4:40)
    • Reinstall the brake pad springs
    • Apply grease to the brake pads
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread 14mm bolts by hand
    • Tighten bolts to 23 to 25 foot-pounds
  7. step : Reattaching the Wheel (6:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (6:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Tool

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(07:04 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • White Grease

  • Ratchets & Related

  • 3/8 Inch Breaker Bar
  • 3/8 Inch Drive Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Brake Caliper Tool



This part replaces:

  • Nakamoto MD900

Vehicle Fit

  • 2001 Infiniti G20 Rear Premium Posi Semi-Metallic Brake Pads (Built After 11/00 Production Date) Nakamoto
  • 2002 Infiniti G20 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2001 Infiniti I30 Rear Premium Posi Semi-Metallic Brake Pads (Built After 10/02/00 Production Date) Nakamoto
  • 2002-2004 Infiniti I35 Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2001 Nissan Maxima Rear Premium Posi Semi-Metallic Brake Pads (Built After 10/02/00 Production Date) Nakamoto
  • 2002-2003 Nissan Maxima Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
  • 2002-2006 Nissan Sentra SE-R Rear Premium Posi Semi-Metallic Brake Pads Nakamoto
Part #: 1ABPS00406

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: MD900

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More