This performance brake rotor & posi pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 4 Piece Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a matched pair
    • Includes both LH (Driver) & RH (Passenger) Side REAR
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: YL1Z 2C026 AA, YL1Z2C026AA, YL7Z 1V125 BA, YL7Z1V125BA
  • Fits 5 Stud Wheels
  • 13.15" (334mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Zinc Coated

Helps reduce rust and corrosion for a longer-lasting and better looking rotor.

"True" Non-Interference Vane Design

Retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots remove brake dust and expel gasses during hard braking.

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power.

Part Details

  • Brake Rotor Coating: Zinc Coated
  • Brake Pad Bonding Type: Premium Posi
  • Brake Rotor Type: Cross Drilled & Slotted
  • Brake Pad Friction Material: Semi-Metallic
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Rear Performance Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 13.15" (334mm)
  • Rear Brake Rotor Specifications: 5 Lug
  • Product Line: Performance

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:25)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:06)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  3. step : Removing the Brake Drum (2:29)
    • Tighten a lug nut to the hub
    • Tap the drum to loosen it
    • Remove the lug nut
    • Pull the drum off
  4. step : Installing the New Brake Drum (3:57)
    • Slide the drum on
    • Thread on one lug nut to hold the drum in place
    • Adjust the emergency brake, if necessary
    • Clean the drum with brake parts cleaner or mineral spirits
  5. step : Installing the New Brake Pads (4:57)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Apply grease to the back of the pads and their contact point on the cast iron
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the caliper bolts
    • Remove the lug nut from the hub
  6. step : Reattaching the Wheel (7:25)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Hammer

  • Materials, Fluids, and Supplies

  • Bungee Cord
  • Anti-Seize Grease
  • Mineral Spirits

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2002Ford Expedition Ford Expedition Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
1997-2003Ford F150 Truck Ford F150 Truck Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
2002Lincoln Blackwood Lincoln Blackwood Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
1998-2002Lincoln Navigator Lincoln Navigator Rear Premium Posi Semi-Metallic Cross Drilled & Slotted Zinc Coated Performance Brake Kit
Part #: 1APBS00063


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:14 min)