Brake Pad Specifications:

  • Premium Posi Semi Metallic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Fits 5 Lug Wheel
  • 11.65" (296mm) diameter vented front
  • 11.02" (280mm) diameter solid rear

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Rear Semi-Metallic Brake Pad Set
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 5 Lug
  • Rear Brake Rotor Specifications: 11.02" (280mm)
  • Front Brake Rotor Specifications: 11.65" (296mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:24)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:14)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove 14mm bolts from the brake caliper
    • Pull the caliper aside and hang it by bungee cord
    • Remove the wires
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:39)
    • Remove 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
    • If the rotor will not come off, thread the lug nuts and strike the hub area of the rotor with the ball end of a ball peen hammer
  4. step : Installing the New Brake Rotor (4:03)
    • Clean the hub with a wire brush
    • Clean both sides of the rotor with brake parts cleaner
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
  5. step : Installing the New Brake Pads (4:52)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Clean the brake pad slides with a wire brush
    • Apply grease to the caliper slides
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Apply grease to the brake pad tabs
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Tighten the bolts
    • Tighten the bracket bolts to 79 foot-pounds of torque
  6. step : Reattaching the Wheel (8:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 76 foot-pounds in a crossing or star pattern
    • Press on the hub cap
  7. step : Testing the Brakes (9:07)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease
  • Cloth Rags

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 19mm Socket
  • 21mm Socket

  • Specialty Tools

  • Dead Blow Hammer

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Bought a kit for a camry
From start to finish such a smooth process and great price!!!! Will def buy from this place again.
February 26, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2013-2016Lexus ES300h Lexus ES300h Front & Rear Premium Posi Semi-Metallic Brake Kit
2007-2016Lexus ES350 Lexus ES350 Front & Rear Premium Posi Semi-Metallic Brake Kit
2008-2016Toyota Avalon Toyota Avalon Front & Rear Premium Posi Semi-Metallic Brake Kit
2008-2016Toyota Camry Toyota Camry Front & Rear Premium Posi Semi-Metallic Brake Kit

This part replaces:

  • Reference Number MD1212
Part #: 1ABFS02637


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:40 min)