Brake Pad Specifications:

  • 4 Piece REAR Brake Pad Set
  • Direct replacement
  • Professional Grade CERAMIC ENHANCED Disc Brake Pads

Brake Rotor Specifications:

  • Come as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) REAR
  • 288 mm (11.3") diameter
  • Fits 5 Stud Wheels
  • Built to strict quality control standards

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Premium Electrostatic Coated Brake Rotor Features and Benefits:

  • Electrostatically applied finish on both sides of the rotor hat and rotor edge for long lasting corrosion protection.
  • Uniform coating without any overspray.
  • Enhanced appearance.
  • Designed to withstand 400 hours of saltwater exposure without rusting.
  • Mill balanced and double-disc ground friction surface provides smooth braking and longer pad life.
  • Positive Mold Technology

    Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

    OE Grade Multi-Layer Shim

    OE Grade Multi-Layer Shim helps reduce vibration and noise

    Environmentally Compliant

    Certified Environmentally Compliant to "Better Brake Law" standards

    Thermal Scorched

    Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

    100% CNC-Machined to Exact OE Specs

    100% CNC-Machined to exact OE specs and balanced to reduce vibration

    Cast from OE Grade Alloy

    Manufactured from OE Grade G3000 Casting Alloy

    Non-Directional Surface Finish

    Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

    Lifetime Warranty

    This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Wear and Tear

    This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

    1. step : Removing the Wheel (0:23)
      • Loosen the 21mm lug nuts with the vehicle on the ground
      • Raise the vehicle with a floor jack
      • Secure the vehicle on jack stands
      • Remove the lug nuts
      • Pull off the wheel
    2. step : Removing the Brake Pads (2:33)
      • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
      • Remove 14mm bolts from the brake caliper
      • Pull the caliper aside
      • Pry the brake pads off with a flat blade screwdriver
    3. step : Removing the Brake Rotor (6:22)
      • Remove 17mm bolts from the brake caliper bracket
      • Pull off the brake caliper bracket
      • Remove the plug from the rotor
      • Adjust the adjustor with a flat blade screwdriver to release the brake shoes
      • Pull the rotor off
    4. step : Preparing the New Brake Pads and Rotors (13:58)
      • Remove the brake pad slides
      • Apply grease to the caliper slides
      • Clip in the brake pad slides
    5. step : Installing the New Brake Rotor (18:47)
      • Clean the rotor with brake parts cleaner
      • Slide the rotor on
      • Thread on one lug nut to hold the rotor in place
      • Adjust the emergency brake adjustor
      • Plug on the dust cap
      • Put the caliper bracket back into place
      • Start the bolts by hand
      • Tighten the bolts to 58 foot-pounds of torque
    6. step : Installing the New Brake Pads (21:12)
      • Put an old pad in the caliper
      • Use a large C-clamp and the old pad to push the pistons back
      • Clean the pad surface with brake parts cleaner
      • Apply grease to the brake pad tabs
      • Install the new brake pads into the bracket
      • Put the caliper on
      • Add grease to the brake pad slide bolts
      • Thread bolts by hand
      • Tighten bolts to 32 foot-pounds
      • Remove the lug nut from the rotor
    7. step : Reattaching the Wheel (26:29)
      • Slide the wheel into place
      • Start the lug nuts by hand
      • Tighten the lug nuts preliminarily
      • Lower the vehicle to the ground
      • Tighten the lug nuts to between 76 foot-pounds in a crossing or star pattern
    8. step : Testing the Brakes (27:45)
      • Pump your brakes repeatedly until they feel firm
      • Test your brakes at 5 miles per hour and then 10 miles per hour
      • Road test the vehicle

    Tools needed for replacement:

      General Tools

    • Large C-Clamp
    • Hammer
    • Jack Stands
    • Rubber Mallet
    • Wire Brush
    • Floor Jack

    • Materials, Fluids, and Supplies

    • Rust Penetrant
    • Brake Parts Cleaner
    • Paper Towels
    • Bungee Cord
    • Anti-Seize Grease

    • Ratchets & Related

    • Torque Wrench
    • 1/2 Inch Breaker Bar

    • Screwdrivers & Related

    • Flat Blade Screwdriver

    • Sockets - Metric

    • Complete Metric Socket Set

    • Sockets - SAE

    • Complete SAE Socket Set

    5.0 / 5.0
    1 Review
    5 Stars
    4 Stars
    3 Stars
    2 Stars
    1 Stars
    Brake kit
    Great price, saved over $60 compared to local auto stores. Very fast shipment. Exact fit making installation a breeze.
    March 8, 2018
    3 months ago
    Start typing your question and we'll check if it was already asked and answered. Learn More
    No questions have been asked about this item. Be the first!

    Vehicle Fit

    • 2004-2006 Lexus RX330 Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2007-2009 Lexus RX350 Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2006-2008 Lexus RX400h Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    • 2004-2007 Toyota Highlander Rear Premium Posi Ceramic Premium E-Coated Brake Kit
    Only 1 left in stock
    Part #: 1ABFS01760

    How-to Video:

    (29:07 min)