Hearing squeaking noises from the wheels? This may be the wear tabs on the brake shoes saying, "it is time for replacement." Aging brakes can also result in a pulsation from the brake pedal or long stopping distances. Brakes should be inspected every 10,000 miles or any time the tires are removed. They may need frequent replacement such as every 20,000 miles if used in stop and go traffic. Brakes can last longer if the vehicle is used primarily for long highway trips.

Specifications:

  • Includes 2 front rotors & a front brake pad set
  • Fits Driver & Passenger Side Front
  • Semi-Metallic brake pads
  • Direct replacements

This front brake pad & rotor kit makes a great replacement and has an excellent value over the price of dealer brake pads & rotors.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:03)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:53)
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (2:47)
    • Remove the two 10mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Removing the Brake Rotor (4:15)
    • Pull the rotor off by hand
  5. step : Installing the New Brake Rotor (4:21)
    • Slide the rotor on
    • Thread one lug nut to hold the rotor in place
  6. step : Installing the New Brake Pads (4:41)
    • Pry the piston back with a flat blade screwdriver or push the piston in with a C-Clamp
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the two 10mm bolts by hand
    • Tighten the bolts to 20 foot-pounds
  7. step : Reattaching the Wheel (8:10)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (8:41)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Chrysler Concorde Front Semi-Metallic Brake Kit
  • 1994-1997 Chrysler LHS Front Semi-Metallic Brake Kit
  • 1994-1996 Chrysler New Yorker Front Semi-Metallic Brake Kit
  • 1993-1997 Dodge Intrepid Front Semi-Metallic Brake Kit
  • 1993-1997 Eagle Vision Front Semi-Metallic Brake Kit
Only 3 left in stock
Part #: 1ABFS00010


How-to Video:

(09:15 min)