Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
    • Includes LH (Driver) & RH (Passenger) Side Front & Rear
  • Cross drilled, Slotted, And Zinc Coated
  • Replaces dealer part numbers: 18060214, 15716362
  • Fits 6 Stud Wheels

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

Zinc Coated

Zinc Coated to help reduce rust and corrosion for a longer-lasting and better looking rotor

"True" Non-Interference Vane Design

"True" Non-Interference Vane Design retains the structural integrity of the rotor

CNC Cross Drilled and Slotted

Precision-Rounded End Slots are machined to remove brake dust and expel gasses during hard braking

Cross Drilled Holes improve ventilation and cooling for less brake fade and more positive stopping power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:37)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:03)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Pads (1:13)
    • Remove T55 Torx bolts from the brake caliper with a T55 Torx bit and ratchet
    • Use either a C-clamp to squeeze the rotor or a screwdriver to pry the brake caliper off
    • Pry the brake pads off with a flat blade screwdriver
  4. step : Preparing the Brake Caliper (2:23)
    • Apply brake grease to either side of your brake pads
    • Push the brake pads into place, using a hammer if necessary
    • Using an old brake pad put it on to the caliper pistons and tighten it in with the C-Clamp
    • Grease up the caliper bolts
  5. step : Replacing the Brake Caliper (3:10)
    • Put the caliper back into place
    • Slide the slide bolts back in
    • Tighten the slide bolts to 30 ft/lbs
  6. step : Reattaching the Wheel (3:43)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps
  7. step : Testing the Brakes (4:15)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 22mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Great brake kit
Great kit for do it yourself job. I also got the front wheel bearinghub pair for the 2004 Chevy suburban 2 wheel drive. I did not read the instruction for slotted and drilled rotors so had to remove and exchange the passenger side rear rotor with the correct one. The driver side went in easy. The front needed new wheel bearing hubs. They were rusted in and wd40 and a little time along with a 3 lb hammer convinced the old hub out. 1AAUTO IS THE BEST.
November 16, 2017
Purchased
6 months ago
GREAT LOOKING ROTORS
THIS BRAKE PAD AND ROTOR SET ARE VERY WELL WORTH THE PRICE. LOOK GREAT AND PERFORM WELL.
September 20, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002 Cadillac Escalade Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance for Models with with Brake Rotor ID 15727134
  • 2003-2006 Cadillac Escalade 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2003 Cadillac Escalade ESV 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002-2003 Cadillac Escalade EXT 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002-2006 Chevy Avalanche 1500 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2007-2008 Chevy Express 1500 Van Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002 Chevy Suburban 1500 Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance for Models with with Brake Rotor ID 15727134
  • 2003-2006 Chevy Suburban 1500 Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002 Chevy Tahoe Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance for Models with with Brake Rotor ID 15727134
  • 2003-2006 Chevy Tahoe 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2006-2008 GMC Savana 1500 Van Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002 GMC Yukon Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance for Models with with Brake Rotor ID 15727134
  • 2003-2006 GMC Yukon 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
  • 2002 GMC Yukon XL 1500 Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance for Models with with Brake Rotor ID 15727134
  • 2003-2006 GMC Yukon XL 1500 2 Wheel Drive Front & Rear Cross Drilled & Slotted Premium Posi Brake Kit Front Zinc Coated Ceramic Performance
Part #: 1APBS00862


How-to Video:

(04:46 min)