1ASSL00298-BMW Rear Driver or Passenger Side Sway Bar Link

Replaces

BMW Rear Driver or Passenger Side Sway Bar Link TRQ

1ASSL00298

This part replaces:

  • Moog K80457
  • OE # 33551094619
  • TRQ PSA68067
FREE SAME DAY SHIPPING
Save 39%
List: $27.95 Save: $11.00
Only 10 left in stock
Part 1ASSL00298
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA68067

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

This replacement sway bar link is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item the end links are. Over time the ball & socket joints can wear causing loose connections, or even come apart and fall off.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) REAR
  • Replaces dealer part number: 33 55 1 094 619, 33551094619
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Rear Sway Bar Links (0:24)
    • Raise and support the vehicle
    • Remove the two 13 mm nuts securing the sway bar link bracket to the lower control arm
    • If the bolt spins you can hold it with a 17 mm ratchet or wrench
    • Repeat on the other side
    • Remove the 13 mm nut and the 13 mm sway bar bushing bolt on each side
    • You may need to detach the muffler from the rubber mounts to reach the driver side sway bar bushing
    • Remove the sway bar bushing tabs from the mounting brackets, and remove the rear sway bar
    • Mount the sway bar in a vise
    • Apply soapy water to the sway bar link bushing
    • Twist and pull the sway bar link to remove it
    • Mount the sway bar link in the vise
    • Remove the 13 mm nut and 13 mm bolt from the top sway bar link end to remove the mounting bracket
    • Repeat for the other sway bar link
  2. step : Installing the Rear Sway Bar Links (7:30)
    • Clean off the sway bar ends if they are rusty
    • Using soapy water, press or tap the lower sway bar links onto the sway bar ends
    • Mount the sway bar link bracket on the the upper sway bar link ends, making sure the tab of the bracket faces towards the middle of the sway bar
    • Install the 13mm bolt and nut to secure each of the sway bar link brackets
    • Mount the sway bar so that the link brackets fit into the lower control arms, and the bushing tabs fit into the mounting brackets
    • Loosely reinstall the 17mm bolts and 13 mm nuts to secure the sway bar link brackets onto the lower control arms
    • Reinstall the 13 mm bolts and 13 mm nuts to secure the sway bar bushings onto the mounting brackets
    • Tighten the sway bar link bracket nuts
    • Reinstall the muffler onto the hangers
    • Lower the vehicle

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Vise
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Soapy Water

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 17mm Wrench
  • 13mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2000BMW 323Ci BMW 323Ci Rear Driver or Passenger Side Sway Bar Link
1999-2000BMW 323i BMW 323i Rear Driver or Passenger Side Sway Bar Link
2001-2006BMW 325Ci BMW 325Ci Rear Driver or Passenger Side Sway Bar Link
2001-2005BMW 325Xi BMW 325Xi Rear Driver or Passenger Side Sway Bar Link
2001-2005BMW 325i BMW 325i Rear Driver or Passenger Side Sway Bar Link
2000BMW 328Ci BMW 328Ci Rear Driver or Passenger Side Sway Bar Link
1999-2000BMW 328i BMW 328i Rear Driver or Passenger Side Sway Bar Link
2001-2006BMW 330Ci BMW 330Ci Rear Driver or Passenger Side Sway Bar Link
2001-2006BMW 330Xi BMW 330Xi Rear Driver or Passenger Side Sway Bar Link
2001-2005BMW 330i BMW 330i Rear Driver or Passenger Side Sway Bar Link

Part Interchange

Brand Label Part Number
DIY Solutions SUS06865
MOOG K80457
MOOG Chassis Products K80457

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA68067
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Sway bar link BMW
Arrived as expected. Fitment was spot on. good quality all around.
May 15, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


BMW Rear Driver or Passenger Side Sway Bar Link TRQ-1ASSL00298 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.