1AHCK00012-BMW Cooling System Service Kit 3 Piece Set

Replaces

BMW Cooling System Service Kit 3 Piece Set DIY Solutions HVA01089

1AHCK00012
FREE SAME DAY SHIPPING
Save 27%
List: $123.95 Save: $34.00
Part 1AHCK00012

Out of Stock

Free GROUND SHIPPING

Close



DIY Solutions
Brand #: HVA01089
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Quantity:   3 Piece Set
  • Kit Includes:
      (1) Radiator Cooling Fan Clutch
      (1) Thermostat & Water Outlet Assembly
      (1) Water Pump with Metal Impeller

Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a single purchase of a customized kit or set from DIY Solutions.

High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Radiator Fan and Shroud (0:22)
    • Disconnect the negative battery cable by loosening the 10mm nut
    • Remove the air collector push pin retainers
    • Remove the air collector
    • Disconnect the two electrical connectors on the passenger side of the fan shroud
    • Remove the T25 screw from the passenger side corner of the fan shroud
    • Remove the push pin retainer from the driver side corner of the fan shroud
    • Loosen the radiator fan clutch using a fan clutch tool
    • The fan clutch is reverse threaded
    • Remove the fan and fan shroud
  2. step : Removing the Air Filter Box (4:22)
    • Disconnect the MAF electrical connector
    • Loosen the air filter box hose clamp
    • Disconnect the air tube from the air filter box
    • Release the air filter box lever latches
    • Remove the air filter box lid
    • Remove the air filter
    • Remove the two 10 mm bolts securing the air filter box
    • Disconnect the hose from the retaining tab
    • Remove the air filter box
  3. step : Draining the Coolant (5:53)
    • Remove the coolant reservoir cap
    • Open the radiator drain at the bottom driver side of the radiator to drain the coolant
    • Release the retaining clips to disconnect the upper radiator hose from the coolant reservoir and radiator
    • Disconnect the electrical connector from the lower radiator hose
    • Release the retaining clip to disconnect the lower radiator hose from the radiator
    • Release the retaining clip to disconnect the lower radiator hose from the thermostat housing
  4. step : Removing the Water Pump (8:55)
    • Loosen the 10 mm water pump pulley bolts
    • Turn the AC belt tensioner clockwise with a 16 mm socket
    • Remove the AC belt
    • Release the AC belt tensioner
    • Loosen the serpentine belt tensioner with a 16 mm socket
    • Insert a pin through the tensioner hold holes
    • Remove the serpentine belt
    • Remove the water pump pulley bolts
    • Remove the water pump pulley, tapping it lightly with a hammer if it's stuck
    • Remove the four 10 mm water pump nuts
    • Tighten bolts into the two threaded holes in the water pump to push the water pump out
  5. step : Installing the Water Pump (14:11)
    • Clean the water pump mounting surface in the engine
    • Add white lithium grease to the water pump seal if desired to make installation easier
    • Install the water pump onto the mounting studs
    • Install the four 10 mm nuts
    • Torque the four 10 mm nuts to 84 in-lb
    • Align the water pump pulley with the mounting holes in the water pump
    • Install the four 10 mm water pump pulley bolts
    • Torque the 10 mm water pump pulley bolts to 89 in-lb
  6. step : Installing the AC and Serpentine Belts (16:59)
    • Slide the serpentine belt over the crank pulley, to the right around the power steering pulley, loop the belt around the tensioner pulley, and back over to the water pump pulley, bring the belt over the alternator pulley, then under the idler pulley
    • Loosen the tensioner with a 16 mm socket to get the belt under the idler pulley, then remove the pin and then release the tensioner
    • Loosen the AC tensioner with a 16 mm socket
    • Install the AC belt around the crank pulley and the AC pulley, and over the tensioner pulley
    • Release the AC tensioner
  7. step : Installing the Radiator Fan and Shroud (19:04)
    • Install the lower radiator hose onto the radiator and lock the retainer
    • Install the electrical connector into the lower radiator hose
    • Install the lower radiator hose into the thermostat housing and lock the retainer
    • Install the upper radiator hose onto the thermostat housing and lock the retainer
    • Install the upper radiator hose onto the radiator and coolant reservoir and lock the retainers
    • Lower the radiator fan and fan shroud together
    • Tighten the fan clutch onto the water pump pulley by turning it clockwise
    • Torque the fan clutch nut to 22-29 ft-lb if able
    • Install the fan shroud push pin retainer on the driver side
    • Install the fan shroud T25 screw on the passenger side
    • Reconnect the two electrical connectors on the passenger side of the fan shroud
  8. step : Installing the Air Filter Box (19:59)
    • Lower the air filter box into position
    • Install the two 10 mm air filter box bolts
    • Install the air filter
    • Slide the air filter cover onto the air tube
    • Secure the air filter cover with the lever latches
    • Reconnect the MAF electrical connector
    • Tighten the air filter cover hose clamp
    • Insert the air collector into the air filter box
    • Secure the air collector with the push pin retainers
    • Reconnect the negative battery cable and tighten the 10 mm nut
  9. step : Refilling the Coolant (24:14)
    • Use coolant specified by the vehicle manual
    • Fill the coolant reservoir
    • Remove the bleeder screw adjacent to the reservoir opening
    • Fill the reservoir until coolant flows out the bleeder opening
    • Reinstall the bleeder screw
    • Adjust the coolant level as necessary
    • Run the engine with the heat on to bleed the system
    • Adjust the coolant level as necessary

Tools needed for replacement:

    General Tools

  • Funnel
  • Hammer
  • Pick
  • Drain Pan

  • Hex Wrenches

  • 5mm Hex Wrench

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • White Grease
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 16mm Socket
  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set
  • Fan Clutch Wrench

  • Star Drivers & Sockets

  • T25 Socket

  • Wrenches - Metric

  • 10mm Wrench


Fits the following Makes:

Year Make Model Description
2000BMW 323Ci BMW 323Ci Cooling System Service Kit 3 Piece Set
1999-2000BMW 323i BMW 323i Cooling System Service Kit 3 Piece Set
2001-2006BMW 325Ci BMW 325Ci Cooling System Service Kit 3 Piece Set
2001-2005BMW 325Xi BMW 325Xi Cooling System Service Kit 3 Piece Set
2001-2005BMW 325i BMW 325i Cooling System Service Kit 3 Piece Set
2000BMW 328Ci BMW 328Ci Cooling System Service Kit 3 Piece Set
1999-2000BMW 328i BMW 328i Cooling System Service Kit 3 Piece Set
2001-2006BMW 330Ci BMW 330Ci Cooling System Service Kit 3 Piece Set
2001-2005BMW 330Xi BMW 330Xi Cooling System Service Kit 3 Piece Set
2001-2005BMW 330i BMW 330i Cooling System Service Kit 3 Piece Set
2001-2003BMW 530i BMW 530i Cooling System Service Kit 3 Piece Set
2001-2006BMW X5 BMW X5 L6 3.0L Cooling System Service Kit 3 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions HVA01089
DIY Solutions HVA02448
DIY Solutions HVA00774
DIY Solutions EWP00089

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: HVA01089
Product Reviews
5.00/ 5.0 3
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Just what I ordered
September 23, 2017
Delievered on Time and was perfect fit for my car,
Fit perfect
October 31, 2018
Too often we mechanics have to go back and forth to the parts store, due to wrong parts or wrong fit, but the parts I ordered from A 1 were exactly what I needed and saved the day. I will only order from A1 from this day forward.
Quality Better than Factory
October 6, 2020
This BMW Cooling System Kit was perfect for what I needed to get back on the road. The main issue with the car was a faulty water pump and per close observation, 1A Auto's part was better quality. The pump had a metal gear vs plastic gear inside the pump. While the fan clutch was fine, this kit really was a bargain especially knowing now all the component parts are replaced with good, reliable quality! Thank you, Tom Nolan - Ball Ground, GA
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
MY MECHANIC SAYS I GOTTA GIVE THE VIN # TO MAKE SURE ITS THE RIGHT FIT ,IS THAT TRUE?
July 12, 2018
10
This kit is not VIN specific. As long as these parts are listed under your year, make and model, they will be a guaranteed fit. Thank you.
July 12, 2018
10
yes it would guarantee direct fit if you can math the vin. If you take a pic of your water pump and match them up would be helpful but sometimes the picture does not reference the part.
July 12, 2018
10
On many vehicles parts are superseded by a different or newer type part and the vin and manufactured date tell them exactly which part came on a particular car and what if any has replaced it. Yes in ordering parts daily I always have those 2 items available for ordering.
July 12, 2018
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


BMW Cooling System Service Kit 3 Piece Set DIY Solutions HVA01089-1AHCK00012 does not fit your:



Same Day Shipping

Orders ship same day when ordered by 2pm ET. Need your part faster? Choose expedited shipping at checkout.

Guaranteed To Fit

Providing you the highest quality, direct fit replacement auto parts enforced to the strictest product standards.

USA Customer Support

Exceeding customers' expectations every day, our team of passionate auto enthusiasts are here to help.

Instructional Video Library

Thousands of how-to auto repair videos specific to year, make and model guide you step-by-step through your repair.

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.