It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can normally be accessed from the passenger foot well area.

Specifications:

  • Direct replacement for models with manual A/C
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 4 Terminal connection
  • Not correct for models with ATC (Automatic Temperature Control)

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Access the resistor (1:00)
    • Remove the three screws under the glove compartment.
    • Use your 7mm socket and driver
  2. step : Remove the resistor (1:45)
    • Remove the 6mm bolts and remove the resistor.
    • Use a swivel socket to access the bolts.
    • Unplug the resistor from the harness.
  3. step : Install new resistor (3:35)
    • Use your swivel socket to bolt it back in.
    • Replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Perfect
This was the exact part I needed and it fit and worked perfectly. Much less expensive than the dealer.
June 30, 2017
Purchased
1 year ago
2001 Nissan Pathfinder Blower Motor Resistor
My fan selector switch would only work on high.Took my blower motor resistor out and no continuty on 2 of the contacts.Ordered new resistor and works great! Fast shipping and part was easy to replace. I would recommend this resistor.
January 26, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2002 Infiniti G20 Blower Motor Resistor with Manual Temperature Control
  • 1993-1997 Nissan Altima Blower Motor Resistor with Manual Temperature Control
  • 1995-1999 Nissan Maxima Blower Motor Resistor with Manual Temperature Control
  • 1996-2004 Nissan Pathfinder Blower Motor Resistor with Manual Temperature Control

This part replaces:

  • OE # 271502J000
  • OE # 271501E405
  • Standard Motor Products RU208
  • Wells JA1210
Only 5 left in stock
Part #: 1AHBR00070


Order must be placed by 4pm ET

How-to Video:

(06:12 min)