This blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.

Specifications:

  • New, not remanufactured or rebuilt
  • Direct replacement for original resistors that may have a angle plug
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 7 & 2 Terminal connection
  • 2 Hole Mounting Flange*
  • For models that have a front and a rear blower motor, this replaces the FRONT RESISTOR

*There are multiple options available for these applications. Please verify your resistor has a 2 hole mounting flange.

Note: For 2007 truck models, the Classic Style has a crease down the center of the door skin where on the new body styles, the door skin is smooth. This part is for the Classic style truck.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : access the resistor (1:12)
    • Remove the four bolts under the glove compartment.
    • Use your 7mm socket and driver
  2. step : remove the resistor (1:35)
    • Unplug the resistor from the harness.
    • Remove the four bolts securing the cover next to the resistor and unplug the remaining harness.
    • Unbolt the now unplugged resistor and remove it.
  3. step : Install new resistor (3:35)
    • Use your wrench to bolt it back in.
    • Plug everything back in, unbolting the cover obstructing the second harness again if necessary.
    • Test and replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 7mm Socket

  • Sockets - SAE

  • 7/32 Inch Socket

4.8 / 5.0
32 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
26
5
1
0
0
Great
Easy to install, great product overall. Very satisfied.
July 6, 2018
Purchased
1 month ago
Blower resistor
This was exactly what I needed and was fast shipping. I would definitely recommend this to others who have same problem
June 19, 2018
Purchased
1 month ago
Works
Does what intended. Perfect fit. Fixed the issue with the fan in my Avalanche.
May 15, 2018
Purchased
2 months ago
perfect fit
I bought this part and a blower motor actuator. I was not sure of the parts to order so I contacted the store and Cameron assured me that these were the correct parts for my vehicle. These parts at the dealer (OEM) wee over $400.00 combined. Thanks Cameron for your EXCELLENT help with my order. I'll be a repeat customer.
May 4, 2018
Purchased
3 months ago
How'd you do that?
Judging from when it arrived, 1a must've shipped it before I even knew I was going to order it. How the h### did they do that??????
May 3, 2018
Purchased
1 year ago
Blower motor resistor
Appears to be an excellent product. It varied from the OEM, but no issues with installation, Very easy to install(. “ how-to videos “were excellent
April 27, 2018
Purchased
3 months ago
Fixed the problem @
Thos part was easily removed and replaced for 2003 Silverado. Fan motor now works on all speeds.
April 14, 2018
Purchased
3 months ago
A-1 Auto offers two great services..First, their YouTube videos are excellent and show you exactly how to make the repair, and second, offer quality parts at a fair price to finish the job...What else do you need????...just watch...then order...thanks A-1
April 12, 2018
Purchased
3 months ago
Blower motor
Part was great plug and play did not fit exactly in opening had to modify it
March 13, 2018
Purchased
4 months ago
Wrong part, excellent SERVICE!
Part arrived timely but did not fit my Suburban as advertised. I called customer service and was taken good care of in a timely and very agreeable manner. Correct part arrived quickly and refund was also handled with dispatch.
February 21, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
My AC is not blowing on the High speed, It will fluctuate on speeds based off the RPM of the engine is going, for example, when I stop at a light, the AC fan speed will sputter. The AC is not working reliably, at times It will not turn on at all. Is this part a possible fix? Thank you
Danny on May 1, 2017
BEST ANSWER: The resistor pack only controls the operation of the blower motor not the operation of the AC unit. If the blower motor works at all speeds when the AC is turned off then the problem is not with the resistor pack. Not sure what you mean when you say the AC does not turn on. Do you mean the indicator light for the AC unit does not come on when you actuate the AC switch or do you mean that the blower motor does not come on. Again if the blower motor does not come on or works intermittently at the different speed settings then the resistor pack is bad.
My blower motor plug in has melted where it plugs into the blower motor, this is the 2nd harness to melt, would the resistor be putting to many amps into the blower motor and melting the harness to where it won't work?
Roger P on Dec 5, 2017
BEST ANSWER: There is a history with this blower / resistor / harness. My guess is replacement resistors are not the best quality (lowest China bidder), the blower is oversized for the resistor and the cable or connector is of insufficient current rating. A poor quality resistor will allow too much current to flow causing the connector and harness to melt. I think you will find that people are replacing the harness with a heavier gauge wire. And I would buy a quality, read more expensive, resistor pack like an oem one. BMW aren't much better. I've been through two in my x5 in 3 years and one in my 2000 gmc. Good luck!
What should the resistance, or on reading be?
D_windex on Jun 25, 2017
BEST ANSWER: The resistance should be the same as factory. Unfortunately we do not have the specs available.

Vehicle Fit

  • 1999-2000 Cadillac Escalade Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2002 Cadillac Escalade Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Cadillac Escalade Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2003-2006 Cadillac Escalade ESV Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2002 Cadillac Escalade EXT Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Cadillac Escalade EXT Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2002 Chevy Avalanche 1500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Avalanche 1500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2002 Chevy Avalanche 2500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Avalanche 2500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 1999-2001 Chevy Silverado 1500 Blower Motor Resistor 2 Hole Mounting Flange
  • 1999-2002 Chevy Silverado 1500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Silverado 1500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 Chevy Silverado 1500 Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001 Chevy Silverado 1500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2001-2002 Chevy Silverado 1500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2003 Chevy Silverado 1500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2005-2006 Chevy Silverado 1500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 Chevy Silverado 1500 HD Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 1999-2001 Chevy Silverado 2500 Blower Motor Resistor 2 Hole Mounting Flange
  • 1999-2002 Chevy Silverado 2500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2004 Chevy Silverado 2500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001-2002 Chevy Silverado 2500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Silverado 2500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 Chevy Silverado 2500 HD Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001 Chevy Silverado 3500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2001-2002 Chevy Silverado 3500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Silverado 3500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 Chevy Silverado 3500 Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2000-2002 Chevy Suburban 1500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Suburban 1500 Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2000-2002 Chevy Suburban 2500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Suburban 2500 Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 1999 Chevy Suburban C1500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 1999 Chevy Suburban C2500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 1999 Chevy Suburban K1500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 1999 Chevy Suburban K2500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2000 Chevy Tahoe Blower Motor Resistor 2 Hole Mounting Flange (excluding Z71 Models)
  • 2001-2002 Chevy Tahoe Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 Chevy Tahoe Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 1999-2001 GMC Sierra 1500 Blower Motor Resistor 2 Hole Mounting Flange
  • 1999-2002 GMC Sierra 1500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Sierra 1500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 GMC Sierra 1500 Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001 GMC Sierra 1500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2001-2002 GMC Sierra 1500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2003 GMC Sierra 1500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2005-2006 GMC Sierra 1500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 GMC Sierra 1500 HD Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 1999-2001 GMC Sierra 2500 Blower Motor Resistor 2 Hole Mounting Flange
  • 1999-2002 GMC Sierra 2500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2004 GMC Sierra 2500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001-2002 GMC Sierra 2500 HD Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Sierra 2500 HD Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 GMC Sierra 2500 HD Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2001 GMC Sierra 3500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2001-2002 GMC Sierra 3500 Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Sierra 3500 Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2007 GMC Sierra 3500 Classic Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2000 GMC Yukon Blower Motor Resistor for Models with 7 Blade Terminal Connector 2 Hole Mounting Flange (excluding Denali Models)
  • 2001-2002 GMC Yukon Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Yukon Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2000 GMC Yukon XL 1500 Blower Motor Resistor for Models with 7 Blade Terminal Connector 2 Hole Mounting Flange
  • 2002 GMC Yukon XL 1500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Yukon XL 1500 Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control
  • 2000 GMC Yukon XL 2500 Blower Motor Resistor for Models with 7 Blade Terminal Connector 2 Hole Mounting Flange
  • 2002 GMC Yukon XL 2500 Front Blower Motor Resistor 2 Hole Mounting Flange
  • 2003-2006 GMC Yukon XL 2500 Front Blower Motor Resistor 2 Hole Mounting Flange with Manual Temperature Control

This part replaces:

  • OE # 15305077, 89018597, 89019089, 1581087, 158770, 22807122
  • OE # 1581087
  • Dorman 973-004
  • Standard Motor Products RU371
Part #: 1AHBR00009

How-to Video:

(06:41 min)