This Chrysler Aspen, Dodge Dakota, & Durango front blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.

Specifications:

  • Brand New
  • Direct replacement
  • Replaces dealer part number: 5174618AA, 5061575AA
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 5 pin connection
  • For the front blower motor on vehicles that have a front and rear unit
  • Does not fit vehicles that have AUTOMATIC TEMPERATURE CONTROL

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: access the resistor (1:00)
    • Remove the three screws under the glove compartment.
    • Use your 7mm socket and driver
  2. step : Step 2: remove the resistor (1:45)
    • Remove the 6mm bolts and remove the resistor.
    • Use a swivel socket to access the bolts.
    • Unplug the resistor from the harness.
  3. step : Step 3 Install new resistor (3:35)
    • Use your swivel socket to bolt it back in.
    • Replace the panel.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Swivel

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Replacement went so Smooth
Again, 1A AUTO's videos and instructions made this replacement a breeze. Done in minutes with their help. Very Satisfied with their overall service!
Thanks!
STCsorgo
February 11, 2017
Purchased
over 2 years ago
Great company to do business with. Parts are top of the line and always match up to oem at half the price. Shipping times are extremely the best. Parts are received as fast as next day delivery no less than 2 day delivery. Well satisfied with this company. Will keep my business with them.
October 25, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2007-2009 Chrysler Aspen Front Blower Motor Resistor with Manual Temperature Control
  • 2001-2004 Dodge Dakota Blower Motor Resistor
  • 2001-2007 Dodge Durango Front Blower Motor Resistor with Manual Temperature Control

This part replaces:

  • OE # 5174618AA, 5061575AA
  • Dorman 973-026
  • Standard Motor Products RU-380
Part #: 1AHBR00001

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:12 min)