Replaces

Blower Motor Resistor Wells Vehicle Electronics CR153 - WEHBR00001

WELLS HEATER BLOWER MOTOR RESISTOR: CR153

This blower motor resistor is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! On most vehicles it is mounted to the HVAC unit inside the passenger compartment. It can be accessed from the passenger foot well area.

Specifications:

  • Brand New Wells Heater Blower Motor Resistor
  • Replaces dealer part number: 4720278
  • Direct replacement
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • 4 Blade terminal

If you are experiencing intermittent stopping during use or the fan only works in one position this may be your solution!

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Blower Motor Resistor (0:32)
    • Locate the resistor under the glove box on the HVAC box
    • Disconnect the wiring harness
    • Remove the two Phillips screws from the resistor
    • Remove the resistor
  2. step : Installing the Blower Motor Resistor (1:51)
    • Insert the blower resistor into place
    • Tighten the two Phillips screws to the resistor
    • Connect the wiring harness

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1994-2006 Dodge Ram 1500 Truck Blower Motor Resistor Wells Vehicle Electronics CR153
  • 2007-2009 Dodge Ram 1500 Truck Blower Motor Resistor for Models with Dual Zone Temperature Control Wells Vehicle Electronics CR153
  • 1994-2006 Dodge Ram 2500 Truck Blower Motor Resistor Wells Vehicle Electronics CR153
  • 2007-2009 Dodge Ram 2500 Truck Blower Motor Resistor for Models with Dual Zone Temperature Control Wells Vehicle Electronics CR153
  • 1994-2006 Dodge Ram 3500 Truck Blower Motor Resistor Wells Vehicle Electronics CR153
  • 2007-2009 Dodge Ram 3500 Truck Blower Motor Resistor for Models with Dual Zone Temperature Control Wells Vehicle Electronics CR153
  • 1993-1996 Jeep Grand Cherokee Blower Motor Resistor Wells Vehicle Electronics CR153
  • 1997-1999 Jeep Grand Cherokee Blower Motor Resistor with Manual Temperature Control Wells Vehicle Electronics CR153

This part replaces:

  • Wells Vehicle Electronics CR153
  • OE # 4720278
Only 1 left in stock
Part #: WEHBR00001

Ships Same Day for orders placed by 4 P.M. ET

WELLS
Brand #: CR153

How-to Video:

(02:21 min)