Part Details

  • Quantity: 10 Piece Set
  • Kit Includes:
    (2) Front Sway Bar Links
    (2) Front Lower Rearward Control Arms with Ball Joints
    (2) Front Upper Rearward Control Arms with Ball Joints
    (2) Front Upper Forward Control Arms with Ball Joints
    (2) Front Lower Forward Control Arms with Ball Joints

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:46)
    • Remove the center cap with a cap removal tool or pick
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Simulating the Suspension (1:11)
    • Push up on the suspension with a floor jack until the suspension stops compressing
    • Measure the top of the strut mount and mark from the front of the tap to where it lines up at the bottom (3 1/4 inches)
    • Lower the floor jack to release the weight from the suspension
  3. step : Removing the Strut Assembly (2:19)
    • Remove the pinch bolt with a 16mm wrench and 16mm socket and ratchet
    • If the bolt won't remove, use a chisel and hammer
    • Slide a pickle fork under the joint
    • Hammer the pick fork in until it separates from the spindle
    • Remove the Phillips head screw from the coolant tank
    • Slide the tank out of its retainers
    • Remove the 16mm bolt below the expansion tank
    • Remove the rain tray
    • Pull off the rubber boot before the fuse box
    • Remove the 16mm bolt
    • Remove the 16mm bolt by the fuse panel
    • Remove the bolt from the bottom of the strut with a an 18mm socket and 18mm wrench
    • Remove the strut from the lower control arm
  4. step : Removing the Upper Control Arms (7:34)
    • Remove the 16mm bolts holding in the upper control arms
    • Remove the upper control arms
  5. step : Installing the Upper Control Arms (8:04)
    • Insert the upper control arm into place
    • Remember to transfer the mark you used to measure the angle of the control arms
    • Set the angle
    • Tighten the 16mm bolts
    • Torque the control arm bolts to 37 foot-pounds and add 90 degrees
    • Repeat the process for the other side
    • Remove the protective caps from the new boots
  6. step : Reinstalling the Strut Assembly (8:53)
    • Insert the strut assembly into place
    • Tighten the top strut bolts
    • Torque the strut bolts to 55 foot-pounds
    • If the strut rotates, twist it to it's in place
    • Tighten the lower strut bolt with an 18mm socket and wrench
    • Reinstall the forward control arm into the spindle
    • Press the control arm into the spindle with pliers
    • Insert the pinch bolt in halfway
    • Reinstall the nut on the back of the pinch bolt with a 15mm socket and wrench
    • Torque the pinch bolt to 30 foot-pounds
    • Torque the lower strut bolt to 66 foot-pounds
  7. step : Reattaching the Wheel (11:14)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 90 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Pick
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 16mm Socket

  • Specialty Tools

  • Tie Rod Fork
  • Ball Joint Press
  • Audi Wheel Cap Removal Tool

  • Wrenches - Metric

  • 16mm Wrench
  • 18mm Wrench

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
Not safe to drive untill I get the correct hardware
Lower control arms do not come with the correct nuts to secure them to the spindle. Currently not safe to drive. Seem fit like the oem but I don’t have a lot of trust they will last very long. I should have realized there is probably a reason they cost a third of what other kits cost.
August 13, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2003Audi Allroad Quattro Audi Allroad Quattro Suspension Kit 10 Piece Set
2004Audi Allroad Quattro Audi Allroad Quattro (Built Before 4/04 Production Date) Suspension Kit 10 Piece Set

This part replaces:

  • Hollander 512-58575L
  • Hollander 512-58574R
  • Hollander 512-58738
  • Hollander 512-58739
  • Hollander 511-58167L
  • Hollander 511-58166R
  • Hollander 511-58126L
  • Hollander 511-58126R
  • Moog K622223
  • Moog K80483
  • Moog K90497
  • Moog K90498
  • Moog K80525
  • Moog K80526
  • Moog K622222
  • Beck Arnley 102-7549
  • Beck Arnley 102-7550
  • Reference Number MS101209
  • Dorman 520-763
  • Dorman 520-764
  • Dorman 520-767
  • Dorman 520-768
  • Dorman 521-818
  • Dorman 524-471
  • Dorman 522-227
  • Dorman 522-228
  • OE # C
  • OE # P
  • OE # E
  • OE # 8D0407510A
  • OE # F
  • OE # 8D0407509A
  • OE # 8D0 407 509F
  • OE # 8E0 407 510A
  • OE # 4D0411317K
  • OE # 8D0 407 509C
  • OE # 8D0 407 510P
  • OE # 4Z7407693D
  • OE # 8E0407506A
  • OE # 8E0 407 510C
  • OE # 8E0 407 506A
  • OE # 8D0 407 510E
  • OE # 8D0 407 509A
  • OE # 8D0 407 510F
  • OE # 4Z7 407 694D
  • OE # 8E0407505A
  • OE # 8D0 407 509E
  • OE # 4D0 411 317K
  • OE # 4Z7 407 693D
  • OE # 8D0 407 510A
  • OE # 4Z7407151C
  • OE # 4Z7407694D
  • OE # 8E0 407 505A
  • OE # 4Z7 407 151C
  • OE # 8D0 407 509P
  • OE # 8D0 407 510C
Part #: 1ASFK01889


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:37 min)