This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

  • RH (Passenger Side)
  • Outer (1/4 Panel)
  • Replaces dealer part number: 8E5 945 096 A, 8E5945096A
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement

This tail light makes a great replacement and has good cost savings over a dealer unit.

 

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:45)
    • Pry out the insulation trim button near the tail light
    • Remove the bolt from the tail light with a flat blade screwdriver
    • Pull back the red tab to release the fuel door
    • Jimmy the tail light out
    • Disconnect the tail light wiring harness
  2. step : Servicing the Bulbs (1:45)
    • Unlatch the tail light circuit board from the light
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
    • Latch the circuit board into the tail light
  3. step : Installing the New Tail Light (2:22)
    • Reconnect the wiring harness to the tail light
    • Line up the bolt holes on the tail light bracket to the bolt holes on the vehicle
    • Insert the tail light into place
    • Tighten the bolt to the tail light with a flat blade screwdriver
    • Push on the insulation trim button

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005 Audi A4 Sedan (From VIN 400001) Outer Tail Light Passenger Side
  • 2006-2008 Audi A4 Sedan Outer Tail Light Passenger Side
  • 2005 Audi A4 Quattro Sedan (From VIN 400001) Outer Tail Light Passenger Side
  • 2006-2008 Audi A4 Quattro Sedan Outer Tail Light Passenger Side
  • 2005 Audi S4 Sedan (From VIN 400001) Outer Tail Light Passenger Side
  • 2006-2008 Audi S4 Sedan Outer Tail Light Passenger Side

This part replaces:

  • Partslink AU2801103
  • Hollander 166-59918R
  • OE # 8E5 945 096 A
  • TYC 11-11185-90
Only 2 left in stock
Part #: 1ALTL01437

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:01 min)