Specifications:

  • Ceramic Brake Pad & Rotor Kit
  • Comes as a Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side) Rear
  • Includes shims
  • Direct replacements
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

Thermal Scorched

Accelerates the break-in process and enhances stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Ceramic
  • Kit Includes: (1) Rear Ceramic Brake Pad Set
  • Kit Includes: (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications: Solid
  • Rear Brake Rotor Specifications: 11.34" (288mm)
  • Rear Brake Rotor Specifications: 5 Lug

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:33)
    • Use a 17mm Socket and a breaker bar to loosen the lug studs/bolts
    • Lift and support the vehicle
    • Remove the lug studs/bolts completely
    • Remove the wheel
  2. step : Removing the Caliper and Brake Pads (1:33)
    • Using a 13mm wrench, remove the caliper mounting bolts
    • Slide the caliper out and secure it with a bungee cord
    • Pry the pads out of their slots and remove them
  3. step : Removing the Caliper Bracket and Brake Rotor (2:40)
    • Using a 14mm triple square bit, remove the two caliper bracket mounting bolts
    • Remove the caliper bracket
    • Using a T30 Torx bit, remove the screw that holds the rotor to the hub
    • Remove the rotor
  4. step : Preparing the Brake Parts (7:19)
    • Using a wire brush, clean up the caliper bracket where the pads attach to it
    • Remove and clean the caliper slide pins, then re-lubricate them with caliper grease
    • Using a wire brush, clean up the hub where the rotor sits
  5. step : Installing the Brake Rotor and Caliper Bracket (9:11)
    • Reinstall the rotor
    • Secure it with the T30 screw
    • Reinstall the caliper bracket and hand tighten the bolts
    • Torque them to 90 newton metres
  6. step : Installing the Brake Pads and Caliper (11:48)
    • Grease the ears of the pads with caliper grease
    • Insert the pads
    • Push the caliper piston back in using the special tool, a 1 inch wrench, and a 14mm wrench
    • Reinstall the caliper
    • Tighten the bolts by hand
    • Torque them to 35 newton metres
  7. step : Reinstalling the Wheel (13:44)
    • Reattach the wheel
    • Tighten the lug studs/bolts
    • Lower the vehicle
    • Torque the lug bolts to 120 newton metres
  8. step : Testing the Brakes (15:00)
    • Pump the brake pedal until firm after the job is done, to remove any gaps between the pads and the caliper

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • 3/8 Inch Breaker Bar

  • Sockets - Metric

  • 17mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Bit
  • E14 Inverted Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 13mm Wrench

  • Wrenches - SAE

  • 1 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006 Audi A4 Rear Ceramic Brake Kit V6 3.2L with 11.33" (288mm) Diameter Rotors
  • 2007-2009 Audi A4 Rear Ceramic Brake Kit for Models with 11.33" (288mm) Diameter Rotors
  • 2006 Audi A4 Quattro Rear Ceramic Brake Kit V6 3.2L with 11.33" (288mm) Diameter Rotors
  • 2007-2009 Audi A4 Quattro Rear Ceramic Brake Kit for Models with 11.33" (288mm) Diameter Rotors

This part replaces:

  • OE # MD1348
  • Reference Number MD1108
  • Reference Number AX900434
  • Reference Number CD1108
Part #: 1ABFS02357

Out of Stock

How-to Video:

(15:39 min)