Part Details

  • Voltage / Wattage / Amperage Rating: 110 Amp

Specifications:

  • Brand New, Not Remanufactured Alternator
  • 110 Amps
  • No core charge
  • Direct replacement
  • Correct electrical connections
  • Built to strict quality control standards
This replacement alternator is just what you need to get your vehicle in good working order again. If your battery is no longer being charged completely, or at all, this alternator may be the solution for you.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (0:37)
    • Disconnect the negative battery cable with an 8mm socket and ratchet
  2. step : Removing the Air Intake Hose (0:56)
    • Loosen the two hose clamps on the air intake hose with a flat blade screwdriver
    • Disconnect the vacuum hose
    • Remove the air intake hose
  3. step : Removing the Alternator (1:18)
    • Insert the 1/2 inch drive ratchet into the tensioner
    • Turn the tensioner clockwise to loosen the belt
    • Pull the belt off the alternator
    • Release the tensioner
    • Remove the 10mm nut from the alternator wiring harness
    • Remove the four 10mm bolts from the alternator bracket
    • Disconnect the alternator wiring harness
    • Remove the alternator bracket
    • Loosen the two 10mm bolts from the bottom of the alternator
    • Lift the alternator up and out
  4. step : Installing the New Alternator (2:57)
    • Insert the alternator into place
    • Insert the bracket on top of the alternator
    • Tighten the four 10mm bolts to the bracket
    • Tighten the four 10mm bolts to 20 foot-pounds of torque
    • Connect the alternator wiring harness
    • Tighten the 10mm nut to the alternator wiring harness
    • Tighten the two 10mm bolts to the bottom of the alternator
    • Tighten the two 10mm bolts between 20 to 25 foot-pounds of torque
    • Pull the belt off the idler pulley
    • Pull the tensioner clockwise with the 3/8 inch ratchet
    • Pull the belt over the alternator
    • Pull the belt under the idler pulley
    • Release the tensioner
  5. step : Reinstalling the Air Intake Hose (5:10)
    • Insert the air intake hose in place
    • Tighten the two hose clamps with a flat blade screwdriver
    • Reconnect the vacuum hose
  6. step : Reconnecting the Battery (5:26)
    • Reconnect the negative battery cable

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Ratchet
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 8mm Socket
  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
The Alternator works great.
The Alternator works great easy to take off and put on. That dam belt was hell. Other than that shipping in all was good. Good job well and have recommended.
December 6, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004Ford F150 Truck Ford F150 Truck New Body Style 110 Amp Alternator
2005-2008Ford F150 Truck Ford F150 Truck 110 Amp Alternator V8 4.6L
2005-2008Ford F150 Truck Ford F150 Truck 110 Amp Alternator V8 5.4L
2006-2008Lincoln Mark LT Lincoln Mark LT 110 Amp Alternator

This part replaces:

  • Hollander 601-00993
  • Lester 8318
  • TYC 2-08318
  • OE # 4L3Z10346BA
  • OE # 4L3U10300BA
Part #: 1AEAL00435

Out of Stock

How-to Video:

(05:55 min)