Replaces

Acura MDX Honda Pilot Sway Bar Link - 1ASFK04705

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   4 Piece Set

Specifications:

  • Brand New Sway Bar End Link
  • Comes as a Set of 4
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:16)
    • Attach the wheel lock key to the locking lug nut
    • Loosen the lug nuts with a breaker bar with the wheel on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:19)
    • Apply rust penetrant to the sway bar link bolts
    • Break loose the 17mm nut on the top of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the top sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the top of the sway bar link
    • Thread the 17mm nut partially onto the top stud
    • Break loose the 17mm nut on the bottom of the sway bar link with a 17mm wrench and a dead blow hammer
    • Counter hold the bottom sway bar link stud with a 5mm Allen Key and breaker bar
    • Remove the 17mm nut from the bottom of the sway bar link
    • Thread the 17mm nut partially onto the bottom stud
    • Pull out the bottom sway bar link stud
    • Remove the nut from the top sway bar link stud
    • Pull out the top sway bar link stud
  3. step : Installing the Sway Bar Link (7:01)
    • Remove the 18mm nuts from the new sway bar link
    • Put the sway bar link into place
    • Start the two 18mm nuts onto the sway bar link
    • Counter hold the top ball joint with an 18mm wrench
    • Tighten the top 18mm nut
    • Counter hold the bottom ball joint with an 18mm wrench
    • Tighten the bottom 18mm nut
    • Tighten the two 18mm nuts to 56 foot-pounds of torque
  4. step : Installing the Wheel (9:02)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds of torque

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Dead Blow Hammer

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench
  • 19mm Wrench

1.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
0
1
Rear links too short
Rear links were approx 6" long - needed to be 7.5" center to center. 1A was great about refund but not much help with respect to getting correct parts so I got "OEM" parts from another online seller. Front links might have been correct but I didnt want to mess around with them given the issue with the rear links being the wrong part.
July 7, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What’s the brand name on these products?
Michael S October 14, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Tim K October 16, 2017
Year Make Model Description
2006-2010Acura MDX Acura MDX Front & Rear Sway Bar Link 4 Piece Set
2006-2008Honda Pilot Honda Pilot Front & Rear Sway Bar Link 4 Piece Set
Part #: 1ASFK04705


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:21 min)