Specifications:

  • Brand New Sway Bar Link
  • Comes as a Set of 4
  • Direct replacements
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:05)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
    • If the wheel is frozen in place, kick the tire to loosen it
  2. step : Removing the Stabilizer Link (1:41)
    • Apply penetrating oil to the stabilizer link bolts
    • Attach an 18mm wrench to the back of the top stabilizer link bolt
    • Remove the top 18mm nut with a socket and ratchet
    • Pull out the top stabilizer link stud
    • Attach an 18mm wrench to the back of the bottom stabilizer link bolt
    • Remove the bottom 18mm nut with a second 18mm wrench
    • Pull out the stabilizer link
  3. step : Installing the New Stabilizer Link (3:30)
    • Push the lower stabilizer link stud into place
    • Push the upper stabilizer link stud into place
    • Start the two 18mm nuts
    • Tighten the nuts to between 55 - 60 foot-pounds of torque
  4. step : Reattaching the Wheel (4:05)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 95 - 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Acura MDX Front & Rear Sway Bar Link 4 Piece Set
  • 2003-2005 Honda Pilot Front & Rear Sway Bar Link 4 Piece Set

This part replaces:

  • Moog K90716
  • Moog K90717
  • OE # 52325S3V003, 52325S3V023
  • OE # 52320S3V003, 52320S3V023
  • OE # 06513S0XA00, 51320S0XA02
  • Moog K90349
  • OE # 06513-S0X-A00, 51320S0XA02
Part #: 1ASFK03074

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:51 min)