This power window regulator with motor is just what you need to get your Civic in great working order again!

This power window regulator and motor features the following specifications:

  • Fits LH (Driver side) Front Door
  • 4 pin rectangular connector
  • Replaces dealer part number: 72250-S5D-A06, 72250S5DA06
  • Built to strict quality control standards
  • Motor and regulator come assembled for easier installation
  • Does not fit Hybrid Models

This Honda Civic power window regulator and motor make a great replacement and have substantial cost savings over a dealer unit.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Part Details

  • Operation: Power
  • Regulator Option: with Motor

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:54)
    • Remove the triangle trim near the side mirror
    • Use a screwdriver to remove the panel behind the door handle
    • Pull off the panel on the underside of the pull handle
    • Remove the two Phillips screws under the panel
    • Remove the two Phillips screws behind the door handle
    • Pry the door handle out and press the tab on the clip to release it
    • Remove the clip from the door handle rod
    • Disconnect the harness for the power windows
    • Using a putty knife or door clip tool remove the clips around the edges of the door panel
    • Lift the panel up and off
    • Remove the water shield plugs and carefully pull the water shield down
  2. step : Removing the Window Regulator (3:50)
    • If the window doesn't stay up have a helper hold the window up
    • Use a 10mm socket to remove the bolts on the regulator to free the window
    • Slide the window up and out
    • Disconnect the window motor wire harness
    • Pull up and out on the connection to free the harness from the door
    • Starting on the inside part of the door: Loosen the three 10mm bolts
    • Loosen up the bolt diagonally down from those three
    • Remove the bolt next to this one.
    • Remove the bolt up from this bolt (the one further inside)
    • Loosen the bolt next to this
    • Lift up on the motor to free it.
    • Pull the motor free from the door
  3. step : Installing the New Window Regulator (6:26)
    • Remove the bolts from the old regulator and regulator rail and put them into the new regulator
    • Insert the new regulator into the door
    • Line the regulator up with the bolt holes and hang it by the bolts
    • Tighten the window motor and regulator bolts. Replace the bolts that were removed
    • Reach in and pull out the harness and reconnect it
    • Replace the pins
  4. step : Reinstalling the Window (8:51)
    • Put the window down into the door nose first then rotate it straight
    • Line the window up into the regulator
    • Insert the two bolts that secure the window to the regulator
  5. step : Reinstalling the Door Panel (9:31)
    • Replace the water shield and reinsert the water shield plugs
    • Lift the panel up and towards the window
    • Snap it down into place
    • Hit the clips in around the door
    • Reconnect the door handle to the door rod and reconnect the harness.
    • Snap the door handle into place and replace the screws and panel behind the handle
    • Replace the window switch harness and screws
    • Snap the door pull handle panel back into place
    • Snap the triangle panel at the top of the door back into place

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

4.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
2
0
0
Hard to install
The part worked great. Had a problem with watching the YouTube video and then installing. The video made it seem easy. It was until i had to reattach the window. The part was not positioned the way it should have been. I had to reconnect everything and move it to where it needed to be then finish the install. I’m not a big car guy so it took awhile to figure out. Would have been 5 stars if the part was sent ready to install.
April 10, 2018
Purchased
3 months ago
Just what I needed
Part arrived quickly and thanks to 1A Auto's how to videos on youtube, I was able to replace it with ease. I only just installed it a few weeks ago but everything works great!
March 31, 2018
Purchased
4 months ago
Works As Described, Easy Installation
My son and I changed out the window motor/regulator in less than an hour following the video. We could have done it quite a bit faster, but took our time laying everything out then of course running across the shop to get tools several times. We also had to clean residue from duct tape he had all over the window and door frame to hold up the window from the broken part. The new parts fit with little effort and worked perfectly. I'd buy it again - well, in fact i did as I had previously had to replace another Honda window motor/regulator. Good price, good parts.
December 28, 2017
Purchased
7 months ago
Window regulator
I received the window regulator in a few days after ordering. The installation instructions online were very good. I have noticed that the window goes down just fine but appears to be going up slowly, perhaps binding. The part fit my car and overall I am satisfied with the purchase.
April 3, 2017
Purchased
1 year ago
2005 Honda Civic, front driver window motor
The motor works well. Video is very helpful and gave me confidence to do the job. Two big problems is, 1 the video doesn't show how to get the window out, if the window is stuck in the up position. Took a lot of searching on the internet and about two extra hours because the window wouldn't roll down to the position to remove the two bolts. Second big problem was the wiring harness was too short and that took a little extra work to get the plug to reach. It works but was a much bigger job than expected due to those two problems.

The motor works and fixed my problem. The quality of the motor seems ok except the wiring harness being too short.
February 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this work on a 2004 civic made in japan?
Matthew W on Jan 31, 2017
BEST ANSWER: Yes, this part will be a direct fit replacement as long as your 2004 Honda Civic is a 4 door model, and you intend on installing this for the front driver side door. We do not see any exclusions for models built in Japan or built in North America.

Vehicle Fit

  • 2001 Acura EL 4 Terminal Connector Front Power Window Regulator with Motor Driver Side
  • 2001-2005 Honda Civic 4 Door (US Built Models) 4 Terminal Connector Front Power Window Regulator with Motor Driver Side

This part replaces:

  • Partslink HO1350108
  • Hollander 125-58878L
  • OE # 72250S5DA06
  • Dorman 741-742
  • TYC 660106
Part #: 1AWRG00403

How-to Video:

(12:04 min)