Replaces

Acura EL Honda Civic Sway Bar Link Pair - 1ASFK01289

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are. Over time these bushings can wear resulting in clunking noises.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 52320-S5A-013, 52321-S5A-013, 52320S5A013, 52321S5A013
  • Direct fit replacements
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the frame bushings. These bushings make great replacements and offer good cost savings over the dealer parts.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:39)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (0:43)
    • Hold the upper stabilizer link stud with vice grips
    • Remove the upper nut from the stabilizer link with a 14mm socket and ratchet
    • Hold the lower stabilizer link stud with vice grips
    • Remove the lower nut from the stabilizer link with a 14mm socket and ratchet
    • Pull off the stabilizer link
  3. step : Installing the Sway Bar Link (2:18)
    • Push the stabilizer link into place
    • Start the 14mm nuts by hand
    • Hold the upper stabilizer link stud with vice grips
    • Fasten the upper nut onto the stabilizer link with a 14mm socket and ratchet
    • Hold the lower stabilizer link stud with vice grips
    • Fasten the lower nut onto the stabilizer link with a 14mm socket and ratchet
  4. step : Reattaching the Wheel (3:15)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket
  • 14mm Socket

  • Specialty Tools

  • Vise-Grips

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2005Acura EL Acura EL Rear Sway Bar Link Pair
2001Honda Civic Honda Civic Rear Sway Bar Link Pair
2002-2005Honda Civic Honda Civic Rear Sway Bar Link Pair (excluding SI Models)
Part #: 1ASFK01289


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:06 min)