Kit Includes: (1) Spark Plug Wire Set (8) Spark Plugs
This Ignition Kit comes with NGK G-Power Spark Plugs and TRQ Spark Plug Wires.
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Spark Plugs 2001-09 GMC Sierra 2500 6-0L
How to Replace Spark Plugs 2000-14 Chevy Suburban 1500
Created on:
Tools used
5/8 Inch Spark Plug Socket
1. Preparing Your New Spark Plug
Using a gap tool make sure the gap is the proper size for your vehicle.
Pry it until there is just a little resistance as it slides on to the proper size.
2. Replacing the Spark Plug
Pull the spark plug wire out.
Using a 5/8� socket and ratchet remove the spark plug.
Put the new spark plug into the socket and feed it down into the hole.
Use the ratchet to tighten the spark plug.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we are going to show you, we're going to show you how to replace a spark plug in this 2002 GMC Sierra 2500 HD. It's pretty much the same process with most V-8 engines. And the only tools you're going to need for this vehicle is 5/8-inch-deep socket or a spark-plug socket and a ratchet, and you're also going to need a gap tool.
Okay, so because this is a V-8 engine, it has eight spark plugs. There's four on this side and four on the other side, and in this video, we are just going to show you how to change one of them, but it is pretty much the same process for all eight. Okay so, using your gap tool, you just want to make the gap on the spark plug the proper size. In this vehicle, it is .06. You just want to use the pegs on this pry out the gap on the spark plug until you get it so that there's just a little bit of resistance as it slides on to the proper size. And there it is.
Okay, so you just want to reach down to the spark plug you're changing and disconnect the spark plug wire, and then using your 5/8-inch-deep socket or a spark-plug socket and a ratchet, you just want to twist that out. And then just remove that spark plug. Okay, and then what you want to do to replace it is just put that spark plug right into the socket, feed it down into the hole and just twist it until it's threaded on there. Once it's threaded, you just want to use your ratchet and tighten up that spark plug the rest of way. Generally, you want to tighten them to about 20 to 25 foot pounds. Then remove your socket and put the spark plug wire in place and just repeat that process for the other seven spark plugs.
We hope this helps you out. Brought to you bywww.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Socket Extensions
Torque Wrench
5/8 Inch Spark Plug Socket
Ratchet
1. Removing the Spark Plug
Make sure the engine is cold
Grab and work the boot off of the spark plug
Clean off any dirt on the end of the plug
Remove the spark plug with a 5/8 spark plug socket
2. Installing the Spark Plug
Insert the spark plug into the spark plug socket
Tighten the spark plug without cross-threading it
Torque the spark plug to 11 foot-pounds
Press on the spark plug boot
These are where your spark plugs are on this 2009 Chevy Suburban. It's the rearmost one of the driver's side. We have four in each side. One, two, three, four. We go over to the passenger's side. This one is a little bit trickier to get to. It's in the way, way back. We've got back there, one here, one here, and one here. It'll be just enough room to get it. We're going to show you how to replace one on the driver's side front. This procedure is going to be the same for all of them. It just might take a little more maneuvering to get to the other side.
I'm going to give this a little turn, and then you don't want to pull on the wire. All you've got to do is work it off of the electrode and of the spark plug. It's usually on there pretty tight. I should also mention that you should do this when the engine is cold because we're right next to the exhaust manifold. Just put this to the side. You should do these one at a time.
Spark plug is down here in the head. I'm just going to take some compressed air. Just blow around the spark plug. If you don't have that, it's okay. Just be careful. Maybe take a brush. You just don't want anything falling down into the cylinder when you open up the spark plug hold. These spark plugs are going to take a five-eighths socket. You want to get a spark plug socket. This is a regular five-eighths socket. If you put a spark plug in here, it's real, real loose, and you can turn it while you're trying to install it. The spark plug is going to fall out.
A spark plug specific socket has a rubber insert to grab on to the foursome part of the spark plug so when you put it in here, it seats. You can go to install it. It's not going to fall out and the same when you're using it to remove old spark plugs. You can lift them out of the engine and they won't fall down. We're going to use a three-eighths drive and my five-eighths spark plug socket. It should be on there.
Take my ratchet. You're going to remove it. These are only torqued to eleven foot-pounds, so it shouldn't take much effort to get them out. Once it starts to get loose, you can remove the ratchet. We just use our fingers to spin it out. As you remove it, the spark plug socket is going to hold it in place so if you need to move it around, you're not going to drop it.
So you can see this is our old spark plug and this is our new one from 1AAuto.com. Their threads are the same length. A single electrode. These are going to work great and give you nice performance on your vehicle.
Take our new spark plug and put it into our spark plug socket. Carefully place it into a spark plug opening. Sometimes if you go backwards, it helps you find the threads and then you can spin it forward to go in. It should go in very, very easily. If it feels like it's cross-threading, you should stop and make sure that it's going in nice and straight. Okay. Now that you've got it hand-tight, we're going to torque it to eleven foot-pounds.
The spark plug torque can reinstall our spark plug boot. Just push it on as hard as you can and just check that it's seated.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
IGN01166
In Stock
Product Reviews
Loading reviews
4.91/ 5.011
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
10
1
0
0
0
Justin
January 15, 2021
Everything fit perfectly, few weeks later and still running perfect. These parts went on a 5 3 vortec motor
Quality auto parts
Keith
March 25, 2021
I keithsanmiguel been ordering parts for several vehicles in my family.the customer service were very helpful to find the parts I needed.these parts are exact fit with no problems.I also told my friends about yall and ordered parts as well.thank you very much ! I saved money and deliver was fast .MR.SanMiguel
always satisfied
todd
May 18, 2021
my experience with this company has always left me satisfied
Prefect
BUDDY
June 6, 2021
Prefect fit great price great company will buy again from this company
On point.
Aaron
June 11, 2021
Perfect fit, great service.
my experience
William
June 18, 2021
Got both wires and plugs for less than plugs locally, wires fit perfectly! Thank you
plugs & wires
Jim
July 6, 2021
Great service, speedy delivery,
Tyrone
August 4, 2021
Great thx I will be getting more parts
Gmc 5.3 ignition kit
Daniel
August 14, 2021
Exact part replacement, and an easy install.
Vette man
Loenard
October 7, 2021
Great no problem thanks very much to you and your team
Perfect fit
Joseph
February 13, 2022
Just what I needed at a reasonable price. Perfect fit
Customer Q&A
Will this fit the round coils?March 19, 2021
Tina V
10
Yes, this kit is intended for models with round style ignition coils.
March 25, 2021
Cristina P
Are the plugs pre gapped?March 27, 2021
Pam R
10
Yes. The spark plugs are pre-gapped
March 27, 2021
Joseph F
10
The plugs will be pre gapped.
March 28, 2021
Corey M
It states fits vehicle but old plug wires r rubber outside on end that goes over plug does this matter?April 14, 2021
Tiffany S
What is the spark plug number?August 30, 2021
RUSS W
10
This is an NGK part number 3186.
August 31, 2021
M N
is this exact fit 2005 chevy avalanche 5.3 ?September 2, 2021
John D
10
You will want to measure the wires on your vehicle. These are only listed for vehicles with the 9.20 in Spark Plug Wires.
September 2, 2021
Adam G
10
This was a perfect match and fit for my 2006 Chevrolet Silverado 5.3 so it should be the same on the 2005 Avalanche.
September 3, 2021
Troy H
10
they worked perfect on mu 2003 saburban 5.3l
September 6, 2021
Ryan Z
Do the wires come with the metal heat shields shown in the photo?February 13, 2022
Tyler M
10
Yes they do.
February 13, 2022
Anthony F
10
Yes, they do come as shown in the photo
February 13, 2022
Joseph F
10
Yes got everything shown and fit.
February 13, 2022
WILBURN W
10
Yes they come just as pictured with the heat shield.
February 14, 2022
T I
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.